Westinghouse Rail Systems reduces SIL4 validation effort by 70% with Artisan Studio

February 09, 2009 -- Artisan® Software Tools, the world’s largest independent supplier of industrial-grade, collaborative modeling tools for complex, mission and safety-critical embedded systems and software, has announced that Westinghouse Rail Systems Limited (WRSL) has extended its use of Artisan Studio to develop an automated Safety Integrity Level 4 (SIL4) validation process that has dramatically improved validation speed, resulting in a 70% reduction in its SIL4 validation effort.

WRSL has developed equipment compatible with the European Rail Traffic Management System (ERTMS), under the Invensys Rail Group’s FUTUR brand. A major element of the ERTMS Level 2 solution is the Radio Block Centre (RBC) which sends proceed authorities to trains based on their position and signaling status.

The first application of FUTUR at ERTMS Level 2 is being implemented on the Cordoba to Malaga high speed rail line in Spain. ERTMS Level 2 provides significant benefits in terms of capacity and performance improvements, enhanced safety beyond traditional Automatic Train Protection, and a reduction in operating costs over the railway lifecycle.

WRSL’s RBC for ERTMS Level 2 is a SIL4 system implemented in Ada. For the front-end systems design, WRSL drew heavily on the model-driven capabilities of Artisan Studio, the collaborative modeling environment for complex, mission and safety-critical embedded systems and software from Artisan Software Tools. Artisan Studio was used to specify the system requirements of the RBC in a definitive UML model that would drive the software implementation. However, the all-important back-end SIL4 validation process remained a rather complex and somewhat time-consuming manual process.

“Early in the validation process it was clear that, although very thorough and efficient, the manual process would benefit significantly from automation,” said Tony Smith, R&D Validation Manager for WRSL. “With four distinct activities in the validation process – flowchart diagram generation, flowchart path analysis, the generation of test cases and report production for test case runs - the manual approach naturally incurred a large time overhead. It also introduced potential risk from human error. The manual process lacked flexibility. It was effectively intolerant to changes made to the original model as even the most innocuous design change could impact any of the validation test cases resulting in a massive validation task.”

In seeking to automate the SIL4 validation process for the RBC, WRSL looked to its positive experience with Artisan Studio in defining the original UML model. “Automation was all about using the UML model to its best effect from a validation perspective,” continued Tony Smith. “With getting on for 100 Object Sequence and State Diagrams in the model, resulting in the need for around 450 test cases to validate close on 2000 potential paths, Artisan Studio’s OLE interface was the key to automating the validation process.”

Automatic production of flowchart information for validation use has not only eliminated human error but also the time overhead incurred in the previous manual process. Rather than validation engineers having to manually analyze data previously encapsulated in Excel spreadsheets, the validator is presented with the information in an easy-to-interpret visual format that provides graphical classification of paths and automatically detects incompatibilities, saving both time and money in development of validation tests. In addition, the use of Artisan Studio allows the Westinghouse Rail Systems team to enforce project wide development policy as the OLE interface allows a separate tool to interrogate the UML model for design errors by comparing diagrams to the design standard that exists for Object Sequence Diagrams.

“Time saving to speed development of test cases was the prime motivation for automating the SIL4 validation process for the RBC,” commented Tony Smith. “Having successfully used Artisan Studio for the model development, it only seemed natural to extend its use to automating the validation process. As such, it has resulted in an immediate reduction in validation costs by delivering a staggering 70% reduction in validation effort needed, by eliminating both the manual translation of the model to a flow chart and the potential for error.”

“WRSL’s decision to extend the use of Artisan Studio from requirements specification to system validation is a positive demonstration of our vision of enabling large and often geographically dispersed teams of analysts, systems and software engineers to Work as OneTM, modeling systems and software for the complete project lifecycle from conception to implementation and ongoing support,” said James B. Gambrell, CEO of Artisan Software Tools. “The use of Artisan Studio to drive the automated SIL4 validation process for the RBC has given WRSL the ability to better manage design changes and future product versions from the perspective of compliance. With automation, once the process is proven, validation is all about repetition. The automated process makes WRSL far more responsive to change and gives them the confidence that the impact of change is being fully tested. Now, even the subtlest of design changes to improve RBC performance can be handled with relative ease.”

# # #

About Westinghouse Rail Systems

Westinghouse Rail Systems Limited (WRSL) is a principal member of the extensive, worldwide Invensys Rail Systems group of companies, which itself is part of Invensys plc, a global leader in automation and control, employing 35,000 people. A world leader in railway signaling and control technology with a history of more than 140 years of innovation, WRSL specializes in all aspects of railway control and signaling products and systems, from research and design to manufacture, installation, testing, commissioning, maintenance and full support. WRSL’s solutions are at work on both mainline and mass transit railways throughout the world.

About Artisan Software Tools

Artisan® Software Tools is the world’s largest independent supplier of industrial-grade, collaborative modeling tools for complex, mission-critical systems and software. Artisan has delivered a stable, robust working environment to thousands of users across an extensive range of complex applications in demanding sectors including military, aerospace and defense, automotive and transportation, telecommunications and electronics, and medical. Artisan’s standards-based tool suite, Artisan Studio®, provides comprehensive support for the leading industry standards, including OMG SysML, UML and Architectural Frameworks. Artisan WorkbenchTM provides a fully integrated, collaborative engineering framework for the trouble-free deployment and maintenance of best-in-class tools for mission and safety-critical systems and software development. Artisan’s tools deliver on the promise of an integrated collaborative development environment - allowing systems and software engineering teams to Work as OneTM - from concept through to delivery, maintenance and support. Founded in 1997 with extensive venture capital backing, Artisan is headquartered in the USA and UK with offices in Germany and Italy, supported by a global distributor network. For more information visit: www.ArtisanSoftwareTools.com.

Artisan, Artisan Studio and Real-time Studio are Registered Trademarks of Artisan Software Tools. Work as One and Artisan Workbench are Trademarks of Artisan Software Tools. UML is a Registered Trademark and OMG SysML a Trademark of the Object Management Group.

Read the complete story ...

Review Article Be the first to review this article
Featured Video
Currently No Featured Jobs
Upcoming Events
SRTC-2018 at The Leela Ambience Gurugram NEW DELHI India - Jul 25 - 26, 2018
MPSoC Forum 2018 at The Cliff Lodge 9320 South Cliff Lodge Drive Snowbird UT - Jul 29 - 3, 2018
CDNLive China 2018 at Kerry Hotel Pudong, Shanghai 1388 Hua Mu Road, Pudong Shanghai China - Aug 10, 2018
CDNLive Taiwan 2018 at Ambassador Hotel Hsinchu Taiwan - Aug 14, 2018
TrueCircuits: IoTPLL

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise