Cadence Incisive Palladium III Shortens Sharp's System Design and Verification Cycle

SAN JOSE, CA -- (MARKET WIRE) -- Feb 09, 2009 -- Cadence Design Systems, Inc. (NASDAQ: CDNS), the leader in global electronic design innovation, today announced that the System Device Division of Sharp Corporation has chosen the Cadence® Incisive® Palladium® III Emulator/Accelerator for its system design and verification flow. Sharp said the Palladium technology shortened overall verification time while helping boost product quality through rapid bring-up of its system verification environment and integrated debugging flow.

The Palladium III product's system verification methodology brought Sharp greater efficiency in building its verification environment -- compared to the company's previous methodology, which relied on FPGA prototyping and breadboards -- thereby shortening the compile effort and bring-up time. By deploying the Palladium technology, Sharp eliminated the need to design and produce breadboards, as well as engineering efforts required to partition designs into several FPGA units. Bring-up of verification interfaces was simplified through the use of Cadence SpeedBridge® Adapters for leading-edge protocols. Deploying the Palladium Incisive compiler also helped save Sharp time and ensure quality.

Furthermore, Sharp leveraged the Palladium III product's FullVision debugging feature, which provides full visibility in identifying the bugs in hardware and/or software. Advanced verification techniques, such as assertions, are also supported in the Palladium verification environment, which can greatly improve product quality and traceability. These features provide Sharp verification teams the required verification throughputs and ease of use while minimizing the effort needed to debug the design in a system-level environment.

"Our major goal is the enhancement of customer satisfaction by meeting or exceeding applicable industry standards for quality and reliability," said Hiroshi Kubo, division deputy general manager of the System Device Division at Sharp. "The Palladium system enabled our new methodology while making it easier and faster to build a verification environment than with our traditional system validation with breadboards, which we mainly used in the past. The Palladium system has helped to improve our system design quality, and we plan to deploy this system-level verification solution to new projects. Ultimately it will increase overall product quality with shorter verification time and less development cost."

With the Palladium environment, engineers can start software development months earlier in the design cycle by collaborating with the hardware development team before the actual hardware descriptions are finalized or made available in silicon. This enables Sharp's teams to find and eliminate critical bugs that may exist at the system level, as well as those on hardware or software.

"The Palladium series of accelerator/emulators from Cadence is the market segment leader for system-level verification, and for good reason," said Christopher Tice, senior vice president and general manager of system design and verification at Cadence. "Sharp's experience and success using the Palladium III series highlights our ability to provide overall project-level value for system development worldwide."

About Cadence

Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software and hardware, methodologies, and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers, and research facilities around the world to serve the global electronics industry. More information about the company, its products, and services is available at www.cadence.com.

Cadence, Incisive, SpeedBridge and Palladium are registered trademarks and the Cadence logo is a trademark of Cadence Design Systems, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.

For more information please contact:
Dean Solov
Cadence Design Systems
408-944-7226

Email Contact





Review Article Be the first to review this article

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
Upcoming Events
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy