Analog Devices’ Data Acquisition Chip Enables High Slice Count CT Scanners for Faster, Clearer Images

NORWOOD, Mass.—(BUSINESS WIRE)—February 4, 2009— Use of CT (computed tomography) scanning is increasing as technology improvements provide clearer, more detailed pictures of the human body for physician analysis and diagnosis. At the same time, healthcare facilities are faced with a growing need for better quality, faster, and more affordable diagnostic imaging equipment. Analog Devices, Inc., (NYSE: ADI) the leading provider of data conversion technology and longtime collaborator to the medical imaging industry, is addressing these needs with a new current-to-digital converter chip that enables high slice count CT systems to capture real-time moving images – such as a beating heart – with a high degree of accuracy and detail.

The ADAS1128 is a 24-bit current-to-digital converter that changes photodiode array signals into digital signals. The product offers 128 data conversion channels, provides an unparalleled increase in speed from 6kSPS (kilosamples per second) to 20kSPS, and supports four times more channels (128 versus 32) than any other integrated converter solution available on the market today. This level of performance and integration means a 50 percent reduction of a CT detection system’s electronics cost versus older designs. Click here to watch a video on the features of the ADAS1128.

“Higher slice count CT systems require an increase in the number of data acquisition channels necessary to process images. The level of integration of ADI’s ADAS1128 chip will enable lower cost CT systems by reducing the cost per channel of the data acquisition circuits," said Bernard Gordon, chairman of NeuroLogica Corporation, a provider of medical imaging equipment for healthcare facilities and private practices worldwide. A prominent pioneer in the medical imaging industry, Gordon is also the founder and former CEO of Analogic Corporation, a leading designer and manufacturer of advanced health and security systems and subsystems sold primarily to Original Equipment Manufacturers (OEMs).

CT imaging combines special X-ray equipment with sophisticated computers to produce internal 2D and 3D images of the human body. CT scans of internal organs, bone, soft tissue, and blood vessels provide more detailed images than X-ray exams, enabling physicians to more easily diagnose problems that include cancer, cardiovascular disease, and musculoskeletal disorders. Today, it is estimated that more than 62 million medical CT scans are done in the United States annually, compared to three million in 1980.

“A higher slice count is one of the principal factors that enable current CT scanners to provide more detailed images,” said Patrick O’Doherty, healthcare segment director, Analog Devices. “With the ADAS1128, diagnostic system designers can develop CT scanners that produce clearer images while reducing overall scan time compared with older machines. This is invaluable in critical care areas, such as cardiology, neurology, and angiography. The dramatic system-level cost, size, and power savings resulting from the ADAS1128 means that world-class CT scan diagnostics will become more affordable and practical in medical and security-sensitive environments throughout the world.”

“Advancements in CT scan imaging will fundamentally change the practice and economics of diagnostic imaging,” said Susie Inouye, research director, Databeans, Inc., a leading semiconductor research firm. “Current-to-digital converters that offer higher levels of channel integration will play a vital role in the design of next-generation CT scanners. By quadrupling the number of data conversion channels, ADI’s new current-to-digital converter is setting a new performance benchmark for CT detection system designs.”

Current-to-Digital Converter Features 24-Bit Resolution, 128 Channels, Lower Power

The ADAS1128 replaces previous converter-based technology having low levels of channel integration. The product integrates a 24-bit resolution ADC (analog-to-digital converter) with 128 simultaneously sampled data converter channels, selectable sample rates up to 20kSPS, and on-chip temperature sensor and reference buffer into a 1 cm2 single-chip solution. Along with supporting four times more channels, the product delivers over three times the throughput of any other solution available on the market.

The ADAS1128 consumes less than half the power of other solutions (4.5 mW/channel versus 10 mW/channel at full speed). It also offers superior overall performance specs, such as no charge loss, more choices of full scale ranges, and ultra-low noise (down to 0.4 fC for low-dose X-ray systems).

Other recent medical announcements from ADI include the award-wining AD927x family of eight-channel (octal) receivers for ultrasound systems. These products, along with other ADI offerings, represent today’s broadest IC product portfolio geared specifically toward the healthcare imaging market.

Recommended Complementary Components

Complementary components for the ADAS1128 include the ADR440 XFET® voltage reference and ADP1708 linear regulator.

Pricing and Availability

The ADAS1128 current-to-digital converter is available now in volume production. The ADAS1128 is housed in a compact 10-mm × 10-mm mini BGA (ball grid array) package. For more information, visit Along with CT systems, the ADAS1128 also enables the design of X-ray-based security imaging systems used in shipping yards, harbors, and airports.

1 | 2  Next Page »

Review Article Be the first to review this article

Featured Video
Senior Electrical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Upcoming Events
Methodics User Group Meeting at Maxim Integrated 160 Rio Robles San Jose CA - Jun 5 - 6, 2018
2018 FLEX Korea at Room 402/ 403, COEX Seoul Korea (South) - Jun 20 - 21, 2018
IEEE 5G World FOrum at 5101 Great America Parkway Santa Clara CA - Jul 9 - 11, 2018
SEMICON West 2018 at Moscone Center San Francisco CA - Jul 10 - 12, 2018

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise