Leadis Technology Introduces TapTouch(TM) Solution for Capacitive Touch Applications; Supports up to 56 Touch Zones With a Single 15-Channel Integrated Circuit

SUNNYVALE, CA -- (MARKET WIRE) -- Nov 24, 2008 -- Leadis Technology, Inc. (NASDAQ: LDIS), a provider of best-in-class semiconductor solutions for display, power management, touch and audio applications, today announced a technological innovation that lowers the cost of capacitive touch implementation in high button count applications.

Leadis' new TapTouch™ technology supports up to 56 independent touch zones with a single 15-channel integrated circuit, enabling the integration of large numbers of capacitive touch buttons while keeping system cost and power consumption to a minimum. TapTouch™ extends the capabilities of Leadis' LDS60xx family of button ICs to allow product manufacturers to efficiently implement touch technology into high button count applications such as remote control and telephony applications, where a large number of buttons are inherently required for device operation. TapTouch™ may also be used in screen applications such as mobile handsets and handheld games where functions such as icon selection and gesture recognition are desired.

Leveraging Leadis' expertise in low-cost, low-power solutions, TapTouch™ offers several benefits for product manufacturers and end users:

--  Unlike traditional architectures utilizing one sensor per button,
    TapTouch™ leverages an innovative two-layer sensor array that allows
    each sensor to support multiple touch zones, often eliminating the need for
    multiple touch controllers.
--  Minimizes experience-inhibiting first-touch latency by enabling
    continuous scanning of touch zones without the high power consumption
    typically associated with low- or no-latency implementations.
--  Supports icon selection and gesture-recognition functions without the
    need for a more expensive full-resolution touch screen controller.

In addition, the TapTouch™ solution is compatible with Leadis' integrated LED driver and haptics driver controller offerings.

"Device manufacturers are continuously balancing the needs to meet rising consumer expectations and to keep costs as low as possible," said Alvin Wong, vice president and general manager for Leadis Technology's Touch Business Unit. "We believe that the combination of uncompromised user experience, ultra-low power consumption and a reduced bill-of-materials will quickly drive interest in TapTouch, particularly among the most visionary manufacturers."

TapTouch™ employs a two-tiered sensor structure, enabling multiple touch zones to share a single sensor input. By interpreting which two sensor lines have been activated, the host processor can determine which unique zone has been touched. Leadis provides reference host code for touch zone determination that may be adapted for a variety of different TapTouch™ configurations and applications.

About Leadis Technology, Inc.

Leadis Technology, Inc., headquartered in Sunnyvale, California, designs, develops and markets analog and mixed-signal semiconductors that enable and enhance the features and capabilities of portable and consumer electronics devices. Leadis' product offerings include color display drivers, which are critical components of displays used in portable consumer electronic devices; LED drivers, which provide controlled levels of current required to drive light emitting diodes in diverse applications including mobile backlight units; power management ICs including LDOs, LDO controllers, shunt references, thermal switches, current regulators, and battery charger controllers; and audio CODEC and FM transmitter ICs, which are integral components in portable media players and their associated aftermarket accessories. Leadis currently supplies display drivers supporting the major small panel display technologies, including a-Si and LTPS TFT LCDs, color STN LCDs, and color OLED displays, LED drivers supporting backlighting applications, and audio ICs supporting portable media players and aftermarket audio accessories.

Certain statements in this press release including, but not limited to, the features and benefits of Leadis' new LDS6000 and LDS6020 capacitive touch controller ICs and the anticipated market adoption of these products are forward-looking statements that are subject to risks and uncertainties that could cause results to be materially different than expectations. Such risks and uncertainties include, but are not limited to, lack of market adoption for the LDS6000 and LDS6020, delays in ramping these new products into production, delays in the integration of our products into consumer electronic devices, our reliance on third-party manufacturers, general portable electronics and semiconductor industry trends, and other risks detailed from time to time in Leadis' reports filed with the Securities and Exchange Commission including its Form 10-K for the year ended December 31, 2007 and Form 10-Q for the quarter ended September 30, 2008. Leadis disclaims any obligation to update these forward-looking statements. (LDISG)

Image Available: http://www2.marketwire.com/mw/frame_mw?attachid=879938

Contact Information:

Julie Pestka-Schardt
Leadis Technology, Inc.
Tel: 408.331.8603


Paul Schneider
George Cohen Communications, Inc.

Email Contact
Tel: 215.702.9784

Review Article Be the first to review this article
CST Webinar Series


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
SENIOR ASIC Design Engineer for TiBit Communications at Petaluma, CA
Upcoming Events
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
2016 International Conference On Computer Aided Design at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
ICCAD 2016, Nov 7-10, 2016 at Doubletree Hotel in Austin, TX at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy