nVisage DXP trial version now available for free download

SYDNEY, Australia – January 20, 2002 – Altium Limited (ASX: ALU), a leading developer of Windows-based electronic design and development software, is pleased to announce that a 30 day trial version of its nVisage DXP multi-dimensional design capture system is now available. Engineers will now be able to fully demo the first tool to capture all the dimensions of today's electronics design challenges within a single, integrated application.

nVisage offers:

  • schematic-driven circuit design for PCB implementation
  • mixed schematic- and VHDL-driven FPGA design
  • SPICE & VHDL simulation
  • Pre-layout signal integrity analysis
  • Full compatibility with Altium’s Protel DXP board level design system
The trial version of nVisage DXP can be downloaded from the nVisage website at www.nvisage.com/product/trial.htm . The trial version can also be ordered on CD ROM from the web site or from any Altium sales and support center.

The trial version is fully functional and is not feature limited in any way, allowing engineers to experience the full power and versatility of the nVisage design capture system. The trial version is time-limited to 30 days from the date of installation.

About Altium Limited

Altium Limited (ASX: ALU), trading as Protel International Limited (ASX: PRI) prior to August 6, 2001, is a leading global developer and supplier of desktop Electronic Design Automation (EDA) and embedded software design tools for the Microsoft Windows environment.

Since the company’s foundation in 1985 and its release of the world’s first Microsoft Windows-based EDA tool in 1991, Altium has continued to apply the most advanced software design methods to provide powerful, easy-to-use and affordable design software to engineers and electronics designers worldwide.

Altium’s current product brands include Protel, P-CAD, TASKING, Accolade, CircuitMaker and CAMtastic!. These products offer tailored solutions covering a range of hardware and software design processes.

Altium is headquartered in Sydney, Australia, and operates a number of sales and support offices in Australia, the United States, Japan and Europe, as well as maintaining a large reseller network in all other major markets. More information about the Company and its products and services may be obtained from our website at www.altium.com.

Altium, Protel DXP, DXP, Design Explorer, nVisage, P-CAD, TASKING, Accolade, CircuitMaker, CAMtastic!, Situs and Topological Autorouting and their respective logos are trademarks or registered trademarks of Altium Limited or its subsidiaries. All other registered or unregistered trademarks referenced herein are the property of their respective owners, and no trademark rights to the same are claimed.


Altium USA Media Contact
Sarah Seifert
Edelman
800 West El Camino Real
Mountain View, CA 94040
USA
www.edelman.com
Telephone: +1 650 968 4033
Fax: +1 650 968 2201
Email: Email Contact


Corporate Media Contact
Jessica Maxwell
Altium Limited
Level 3, 12a Rodborough Road
Frenchs Forest, NSW 2086
Australia
www.altium.com
Telephone: +61 2 9975 7710
Fax: +61 2 9975 7720
Email: Email Contact




Review Article Be the first to review this article
Aldec

Featured Video
Jobs
Senior Electrical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Principle Electronic Design Engr for Cypress Semiconductor at San Jose, California
Director, Business Development for Kongsberg Geospatial at Ottawa, Canada
Director, Business Development for Kongsberg Geospatial at remote from home, Any State in the USA
Upcoming Events
IPC Technical Education - PCB Layout - Place and Route at Del Mar Fairgrounds 2260 Jimmy Durante Blvd. Del Mar CA - May 2, 2018
IPC Technical Education at Wisconsin Center 400 W Wisconsin Ave. Milwaukee WI - May 8, 2018
IPC High Reliability Forum at Embassy Suites: Baltimore-At BWI Airport 1300 Concourse Drive Linthicum MD - May 15 - 17, 2018
DAC2018



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise