For Doubling of Processing Power, Upgrade to AT91SAM9G20
The COM reference platform, in a mini-PCI physical form factor, contains 3.3V and 1.8V power supplies for the processor and memories. With the addition of a 1.0V power supply, the board also supports the 400MHz Atmel AT91SAM9G20 for double processing power. The use of 3.3V on the IO pins is ideally suited for industrial type markets where the majority of devices still operate at 3V or higher. The memory interface can be supplied with lower voltages down to 1.8V to enable use of lower cost and lower power memories more widely available. Indesign has adapted the Windows(R) Embedded CE(R) 6.0 board support package with the technical support of Adeneo(R) for the COM with plans to support embedded Linux(R). Indesign also offers consultancy services for ARM(R)-based designs.
Memories and Peripherals. The COM reference platform includes on-board memory of 64MB mobile SDRAM, up to 128MB NAND Flash, and up to 8MB DataFlash for bootloader and program storage, and has the option of booting from DataFlash or NAND Flash. In addition, the reference platform includes the following on-board peripherals: 10/100Mb Ethernet MAC with MII or RMII interface, 4 UART ports (1 full feature, 3 four-wire, IrDA), 2 two-wire UARTs, 2 SPI ports each with 4 chip selects, I2S audio, 2 USB 2.0 Full Speed Host ports, 1 USB 2.0 device port, four 10-bit A/D inputs with on board 3.0V reference, 1 SD card interface, 1 Two-wire (I2C) interface, watch dog timer, a real time counter, and up to 77 general purpose I/Os.
Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions focused on consumer, industrial, security, communications, computing and automotive markets.
About Indesign, LLC
Indesign is an engineering design services firm with a proven track record of helping companies develop new electronic devices. Utilizing an ISO certified, well-defined development process enables Indesign engineers to design quality products on-time and within budget. Engineering disciplines consist of RF design, electrical/circuit design, software/firmware design, mechanical design, human factors design, and testing/validation with a strong emphasis on products utilizing embedded microprocessors and DSPs. To learn more about the history and accomplishments of Indesign, visit their website at http://www.indesign-llc.com.
(C) 2008 Atmel Corporation. All Rights Reserved. Atmel(R), logo and combinations thereof and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. ARM(R) and others are registered trademarks or trademarks of ARM Ltd. Windows(R) Embedded CE(R) and others are registered trademarks or trademarks of Microsoft(R) Corporation. Other terms and product names may be trademarks of others.
Atmel's AT91SAM9260 and AT91SAM9G20 product information may be retrieved at http://www.atmel.com/products/at91/default.asp
Atmel Press Contacts: Peter Bishop, Communications Manager, Atmel Rousset Tel: (+33) (0)4 42 53 61 50, Email: firstname.lastname@example.org Helen Perlegos, Public Relations Tel: (+1) 408 487-2963, Email: Helen.email@example.com Indesign Media Contact: Ron Kern, Technical Marketing Director Tel: (+1) 317 377-5450, Email: firstname.lastname@example.org