AWR and UMS Announce Availability of New Process Design Kit for Advanced GaAs MMIC Foundry Process

EL SEGUNDO, Calif. & PARIS—(BUSINESS WIRE)—June 30, 2008— AWR® and United Monolithic Semiconductors (UMS) today introduced an advanced process design kit (PDK) for the UMS PPH25X GaAs pseudomorphic high electron mobility transistor (pHEMT) foundry process. The UMS PPH25X process is dedicated to the design of microwave monolithic integrated circuits (MMIC) at frequencies up to 35 GHz. The PDK lets users take advantage of the industry-leading fabrication capabilities of UMS together with AWR's innovative Microwave Office® design suite.

The PPH25X process is specifically developed for high-frequency (45 GHz Ft) and high-power designs and is fully qualified by UMS. The process features very high breakdown voltage that achieves power density up to 1 W per millimeter of gate periphery (load-pull power measurements exhibit 5 dB power gain at 30 GHz for a large 8 x 75 µm periphery). Small via-hole definitions through the 70 µm substrate can be connected directly to the sources of the transistors, reducing parasitics and simplifying wideband amplifier design.

AWRs Microwave Office design environment is ideally suited for MMIC development. The software integrates in one seamless environment all the tools essential for high-frequency design: linear and non-linear circuit simulators, electromagnetic (EM) analysis tools, integrated schematic and layout, statistical design capabilities, and parametric cell libraries with built-in design-rule check (DRC). The design suite further provides innovative technologies, a complete front to back flow, and the ability to integrate third-party tools, delivering an intuitive, open, and interoperable environment to MMIC designers.

Pricing and Availability

The PPH25X PDK is available now. Contact your local UMS representative for more information.

About UMS

United Monolithic Semiconductors designs, produces, and markets leading-edge RF, microwave and millimeter wave components and integrated circuits (ICs) for the telecommunications, space, defense, automotive and ISM industries. The company's strategy is to position itself as a "one-stop" supplier to the wireless microwave and millimeter-wave market, offering a broad range of standard and custom MMICs along with an open foundry service. The company has two production facilities, in Orsay, France, where its corporate headquarters is also located, and in Ulm, Germany. The companys products and technologies offer leading-edge performance and high volume capacity. Most technologies are available in open foundry service mode. The company is supported by a global network of representatives and distributors, and is committed to developing partnerships with application and sector specialists that can benefit from advanced III-V technologies. For more information about UMS and its products and services, please visit www.ums-gaas.com.

About AWR

AWR is the innovation leader in high-frequency EDA software. The companys products dramatically reduce development time and cost for products employed in wireless, high-speed wired broadband, aerospace and defense, and electro-optical applications. AWRs core technology is unique among high-frequency EDA platforms because it is inherently open and flexible. AWR continually strengthens its product portfolio with innovative new technologies that enable faster, more streamlined product development. The most recent are the ACE, RFA, and AXIEM tools. The privately-held company has thousands of users, and is headquartered at 1960 East Grand Avenue, Suite 430, El Segundo, Calif. 90245. For more information about AWR and its products, please visit www.awrcorp.com.

© 2008 Applied Wave Research, Inc. AWR, the AWR logo, Microwave Office, ACE, RFA, and AXIEM are either registered trademarks or trademarks of Applied Wave Research, Inc.



Contact:

AWR
Sherry Hess, +1-310-726-3000
Email Contact
or
UMS
Eric Leclerc, +33(0)169330417
Email Contact




Review Article Be the first to review this article
Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Job Openings: Can EDA Predict the Future
More Editorial  
Jobs
Technical Support Engineer for EDA Careers at Freemont, CA
Timing Design Engineer(Job Number: 17001757) for Global Foundaries at Santa Clara, CA
Senior FPGA Designer for Fidus Electronic Product Development at Fremont, CA
Engr, Elec Des 2 for KLA-Tencor at Milpitas, CA
ASIC Design Engineer for Ambarella at Santa Clara, CA
Upcoming Events
CDNLive Silicon Valley 2017 at Santa Clara Convention Center Santa Clara CA - Apr 11 - 12, 2017
10th Anniversary of Cyber-Physical Systems Week at Pittsburgh, PA, USA PA - Apr 18 - 21, 2017
DVCon 2017 China, April 19, 2017, Parkyard Hotel Shanghai, China at Parkyard Hotel Shanghai Shanghai China - Apr 19, 2017
Zuken Innovation World 2017 at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
S2C: FPGA Base prototyping- Download white paper



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy