Carbon Becomes Fujitsu Cedar(TM)-ESL Services Partner

WALTHAM, Mass.—(BUSINESS WIRE)—February 20, 2008— Carbon Design Systems(TM), the leading supplier of tools for the automatic creation, validation and deployment of virtual hardware models, today announced that it has been named a Cedar(TM)-ESL Services Partner by Fujitsu Limited of Tokyo, Japan.

Carbon's automatic model generation technology has been integrated into Fujitsu's Cedar(TM)-ESL Services. Carbon Model Studio creates SystemC models for electronic system level (ESL) environments, including those from ARM, CoWare, Synopsys, VaST and others, for Fujitsu's application specific integrated circuit (ASIC) customers.

"SystemC transaction level modeling (TLM) models are a key component of an ESL design methodology," notes Takashi Hasegawa, Director, ESL and Verification Department, SoC Design Engineering Division, Electronic Devices Business Unit of Fujitsu Limited. "Carbon's technology enables the integration of legacy designs into the ESL world and automatically generates hardware accurate ESL models for new designs."

"Fujitsu has taken a visionary approach to ESL design and it shows through its verification services model and partner program," notes Scott Seaton, Carbon's vice president of sales. "Carbon values this relationship."

About Carbon Design Systems

Carbon is the leading supplier of system-level tools to automatically create, validate and deploy software models generated from Verilog and/or VHDL descriptions. Carbon's models are used in conjunction with SystemC simulation platforms to enable architecture profiling and software validation in parallel with hardware development. Problems can be found and resolved early in the design cycle, rather than waiting for prototypes to be built or silicon to be delivered. Its solutions are based on open industry standards, including SystemC, SCML, Verilog, VHDL, OSCI TLM, MDI, CASI, CADI and CAPI. Carbon's customers are systems, semiconductor, and IP companies that focus on communications, networking, and consumer electronics. Carbon is headquartered at 375 Totten Pond Road, Waltham, Mass., 02451. Telephone: (781) 890-1500. Facsimile: (781) 890-1711. Email: Web site:

Carbon Design Systems acknowledges trademarks or registered trademarks of other organizations for their respective products and services.


Public Relations for Carbon Design Systems
Nanette Collins, 617-437-1822
Email Contact

Review Article Be the first to review this article


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
SEMICON Europe at Grenoble France - Oct 25 - 27, 2016
ARM TechCon 2016 at Santa Clara Convention Center Santa Clara CA - Oct 25 - 27, 2016
Call For Proposals Now Open! at Santa Clara Convention Center, Santa Clara, CA California CA - Oct 25 - 27, 2016
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy