Carbon Design Systems Presents Webinar August 28 on Using Automatic Model Generation for ARM RealView SoC Designer

WALTHAM, Mass.—(BUSINESS WIRE)—August 23, 2007— Carbon Design Systems:
Who:  Carbon Design Systems(TM), the leading supplier of tools for the
      automatic creation, validation and deployment of virtual
      hardware models.

What: Will host a 45-minute webinar on how to use automatic model
      generation with RealView(R) System on Chip (SoC) Designer from
      ARM(R).

      Intended for software developers, hardware architects and
      firmware designers, it will present how to develop
      hardware-accurate models, accelerate the execution of a virtual
      platform and concurrently debug real software against a model of
      the actual hardware implementation.

When: Tuesday, August 28, at 2 p.m. E.D.T (11 a.m. P.D.T.)

Where:Online webex webinar through web browser.

      Webinar Registration:
      http://www.carbondesignsystems.com/corpsite/company/events.html



About Carbon Design Systems

Carbon is the leading supplier of system-level tools to automatically create, validate and deploy software models generated from Verilog and/or VHDL descriptions. Carbon's models are used in conjunction with SystemC simulation platforms to enable architecture profiling and software validation in parallel with hardware development. Problems can be found and resolved early in the design cycle, rather than waiting for prototypes to be built or silicon to be delivered. Its solutions are based on open industry standards, including SystemC, SCML, Verilog, VHDL, OSCI TLM, MDI, CASI, CADI and CAPI. Carbon's customers are systems, semiconductor, and IP companies that focus on communications, networking, and consumer electronics. Carbon is headquartered at 375 Totten Pond Road, Waltham, Mass., 02451. Telephone: (781) 890-1500. Facsimile: (781) 890-1711. Email: info@carbondesignsystems.com. Web site: www.carbondesignsystems.com.

Carbon Design Systems is a trademark of Carbon Design Systems Inc. Carbon acknowledges trademarks or registered trademarks of other organizations for their respective products and services.

Contact:

Public Relations for Carbon Design Systems
Nanette Collins, 617-437-1822
Email Contact


Rating:


Review Article Be the first to review this article
CST: Webinar November 9, 2017

Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
DVCon Europe 2017: Munich and So much more
More Editorial  
Jobs
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Upcoming Events
25th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC 2017) at Yas Viceroy Abu Dhabi Yas Marina Circuit, Yas Island Abu Dhabi United Arab Emirates - Oct 23 - 25, 2017
ARM TechCon 2017 at Santa Clara Convention Center Santa Clara CA - Oct 24 - 26, 2017
MIPI DevCon Bangalore 2017 at The Leela Palace Bengaluru India - Oct 27, 2017
MIPI DevCon Hsinchu City 2017 at Sheraton Hsinchu Hotel Taiwan - Oct 31, 2017
CST: Webinar series
TrueCircuits: UltraPLL



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise