Reminder - Kilopass Announces Speakers and Topics for Its XPM Embedded Non-Volatile Memory Symposium, Co-Sponsored by Cadence Design Systems and TSMC

SANTA CLARA, CA -- (MARKET WIRE) -- May 16, 2007 -- Kilopass Technology Inc., the semiconductor industry's leading technology supplier for embedded Non-Volatile Memory (NVM) IP, announced more about its XPM Embedded Non-Volatile Memory Symposium, co-sponsored by TSMC and Cadence Design Systems. The May 17th Santa Clara Symposium on the use of embedded NVM in SOC designs, features presentations from TSMC, Cadence, Denali, Alchip and Kilopass executives.

Attendees at the Symposium will learn how the next generation of embeddable XPM (Extra Permanent Memory) technology, manufactured on a standard CMOS process with no additional mask or process steps and no other process modifications, addresses advanced consumer and secure application requirements.

About the XPM Embedded NVM Symposium


Santa Clara, Thursday, California, May 17, 2007
Hilton Hotel, 4949 Great America Parkway
Santa Clara, CA 95054
9:30am:     Introduction, Charles Ng, VP , Kilopass Technology
9:35am:     IP Partnering for the SOC Design Success, Kurt Wolf, Library
            Management Director, TSMC
10:05am     Challenges in Mixed-Signal SoC Design, Mladen Nizic, Group
            Director Product Marketing, Cadence
10:30am:    SOC NVM Application -- Requirements, Implementation, & Results,
            User Presentation
11:00am:    The Growing Importance of IP in SOC Applications, Brian
            Gardner, VP of IP Product Marketing, Denali
11:30am:    SOC Design and Embedded NVM, Porter Wong, General Manager,
            Alchip Technologies
12:00pm:    Lunch and Summary: SOC Applications for Embedded NVM, Craig
            Rawlings, Director of Marketing, Kilopass Technology
12:45pm:    Embedded NVM Requirements Panel, Moderated by Dave Bursky,
            Contributing Editor, Chip Design Magazine

Attendees are requested to register by sending an email to Email Contact with their contact information. For more information, please visit

About XPM

Kilopass' silicon-proven, low-cost and highly secure XPM memory technology offers the benefits of post-manufacturing programming of non-volatile memory implemented in standard-logic CMOS processes, including 180 nm, 130 nm, 90 nm and 65 nm. Targeted SOC applications include: Digital Rights Management (DRM), High-bandwidth Digital Content Protection (DHCP), encryption keys, electronic security, mixed signal trim and calibration, memory and pixel repair, encryption keys, firmware parameters, hardware configuration, and (secure) boot code storage.

About Kilopass

Kilopass Technology Inc. was founded with the mission of becoming the industry leader in embedded NVM technology. The company's extra-permanent memory technology is manufactured using standard commercial CMOS processes, and is used for storage of firmware and security codes.

Kilopass is headquartered at 3333 Octavius Dr. Suite 101, Santa Clara, CA 95054, USA. For more information, please visit, call (408) 980-8808 or email Email Contact.

All trademarks are the property of their respective holders.

Press Contact:
Georgia Marszalek
ValleyPR for Kilopass

Email Contact

Review Article Be the first to review this article


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
2016 International Conference On Computer Aided Design at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
ICCAD 2016, Nov 7-10, 2016 at Doubletree Hotel in Austin, TX at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy