GateRocket Delivers The EDA Industry's First Device Native Verification Solution For Advanced FPGAs

Ups Speed, Accuracy, Scalability in FPGA Design

Bedford, Mass. - April 23, 2007 - GateRocket™ Inc. today announced availability of the industry's first Device Native™ verification product that gives Field Programmable Gate Array (FPGA) designers the power to validate designs with one to two orders of magnitude faster simulation, and realize actual device behavior early in the design process. RocketDrive™ is a hardware and software solution that adds significant value to existing design verification environments without a change in design flow or verification methodology.

RocketDrive: The RocketDrive Device Native verification solution is powered by the speed of hardware, the accuracy of the true chip behavior and the unbounded scalability of a system prototype. An EDA first, RocketDrive offers the ability to exhaustively validate and test an FPGA design before committing to production, enabling shorter product development times, higher product quality and improved performance to meet or exceed the requirements of today's demanding marketplace. GateRocket's software allows the verification engineer to place any portions of the FPGA design into the RocketDrive and link it to his or her existing simulation platform. This allows the FPGA to be used natively to (1) speed verification by replacing FPGA models with actual hardware; (2) investigate hardware bugs and test alternatives; and (3) run application level software against a Device Native representation of the design.

Traditional emulation environments strive to be technology independent, but suffer from long and arduous startup efforts for each project and produce inaccurate results. GateRocket's new approach leverages the strength and uniqueness of the FPGA device and the flexibility of popular simulators to deliver a unique and accurate verification solution for these advanced design projects.

In addition, the RocketDrive enables rapid, accurate analysis of IP components by removing the need for special and inaccurate software models since the IP resides directly in the target FPGA device that is in the RocketDrive. For the first time, the designer sees the real on-chip IP behavior while operating within their existing flexible simulation and test verification environment.

"When making the transition from ASIC to FPGA design, I soon realized there was a serious lack of tools to verify and test these sophisticated devices," said Chris Schalick, GateRocket founder, Vice President of Engineering and CTO. "I had an idea and the passion to address this acute debugging and verification problem, so that's when I started GateRocket to solve this industry dilemma and serve this fast-growing market."

Integrated Solution: The RocketDrive takes minutes to install in any Linux PC and integrates seamlessly with the user's existing design and verification environment. The RocketDrive complements design tools from all leading EDA vendors including Cadence Design Systems (CDN), Mentor Graphics Corp. (MENT), Synopsys, Inc. (SNPS), Synplicity, Inc. (SYNP), and the FPGA vendor tools from Altera Corp. (ALTR) and Xilinx, Inc. (XLNX).

Changing Marketplace: As FPGA devices become more advanced they disruptively capture more and more of the ASIC marketplace. The FPGA market, dominated by Altera and Xilinx, has some 25 times the number of design starts than that of the ASIC market according to Gartner/Dataquest. The classical ASIC design and verification bottleneck still exists in FPGA design, yet till now no adequate tools have been available to address this burning market need. A significant commercial opportunity exists to address the design and verification bottleneck for these sophisticated FPGA devices.

"Electronics companies use FPGAs to miniaturize their products while significantly increasing features to meet market demand and create new markets; however electronic design engineers face a crisis in their inability to adequately verify and test these increasingly complex designs," said Dave Orecchio, GateRocket's President and CEO. "GateRocket's solution addresses this problem with the unique and highly productive Device Native approach that can cut in half the time it takes to develop the electronic products we use every minute of every day."

Pricing and Availability: RocketDrives are immediately available for the Altera Stratix 2 and the Xilinx Virtex 4 family of devices with introductory pricing starting at $25,000.

GateRocket at DAC: GateRocket will be exhibiting at the 2007 Design Automation Conference, Booth 2559. To register for a GateRocket Demo at DAC, please visit: http://www.gaterocket.com/dac.php.

About GateRocket: GateRocket, Inc., located in Bedford, Mass., offers the Electronic Design Automation industry's first Device Native verification solution for advanced FPGA semiconductor devices to the global electronics marketplace. The RocketDrive enables companies to verify designs faster and with higher quality. See GateRocket on-line at www.GateRocket.com to learn more, and visit the company's FPGA verification Blog at www.DeviceNative.com.

# # #



Rating:


Review Article Be the first to review this article
CST Webinar Series

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
Upcoming Events
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy