Kilopass’ Charles Ng Will Speak at Storage Visions Conference before Consumer Electronics Conference in Las Vegas

Flamingo Hotel, January 7, 2007

Who
Charles Ng, Vice President of Worldwide Sales & Marketing at Kilopass Technology, will speak at the Storage Visions Conference prior to the Consumer Electronics Show (CES) in Las Vegas about using embedded non-volatile memory XPM for consumer applications.

What
At the Storage Visions session, Charles Ng will present and participate in discussion on Choosing a Mobile CE Storage Product, moderated by Gerry Purdy of Frost and Sullivan. The session will look at the competition among memory alternatives for mobile applications. Companies participating in this session include: SanDisk, Samsung Semiconductor, Migo, Micron, Kilopass, and Hitachi GST.

Mr. Ng has more than 22 years of experience in the semiconductor industry. Prior to joining Kilopass, Mr. Ng held senior management and executive-level positions with Cadence Design Systems, Inc., Compass Design Automation, and VLSI Technology Inc. Mr. Ng was the key contributor in establishing and expanding the business for these companies in North America, Japan and Asia Pacific. He graduated from California Institute of Technology with a Master degree in Computer Science and a Bachelor's Degree in Computer Engineering and he holds a Master of Business Administration degree from University of California at Berkeley.

When
Sunday, January 7, 2007
10:45-11:45am

Where
Flamingo Hotel
Las Vegas, Nevada

Information
For more information about Kilopass, please visit www.kilopass.com.
For more information about Storage Visions, please visit http://www.storagevisions.com/.

About XPM
Kilopass’ silicon-proven, low-cost and highly secure XPM memory technology offers the benefits of post-manufacturing programming of non-volatile memory implemented in standard-logic CMOS processes, including 180nm, 130nm and 90nm. Applications for embedded XPM memories include analog trimming and calibration, chip IDs, security keys, DRM (Digital Rights Management), HDMI, memory repair, CMOS image sensors, digital logic configuration, and secure firmware storage.

About Kilopass Technology
Kilopass Technology, Inc. was founded with the mission of becoming the industry leader in embedded NVM technology. The Company's extra-permanent memory technology is manufactured using standard commercial CMOS processes, and is used for storage of firmware and security codes. Kilopass has been included in four iterations of the Silicon 60, EE Times’ list of 60 emerging startups and was listed as one of the startups shaping tomorrow's technology by EE Times.

Kilopass is headquartered at 3333 Octavius Dr. Suite 101, Santa Clara, CA 95054, USA. For more information, please visit http://www.kilopass.com, call (408) 980-8808 or email Email Contact.

Press Contact:
Georgia Marszalek, ValleyPR for Kilopass, (650) 345 7477, Email Contact

XPM is a trademark of Kilopass Technology, Inc. All other trademarks and tradenames are the property of their respective holders.



Review Article Be the first to review this article
SI2

AMIQ: dvteclipse

Featured Video
Editorial
Peggy AycinenaIP Showcase
by Peggy Aycinena
Grant Pierce: Grand Challenges in IP
More Editorial  
Jobs
LVS PEX DESIGN ENGINEERS SILICON VALLEY for EDA Careers at San Jose, CA
Technical Support Engineer for EDA Careers at Freemont, CA
LVS for PDK Design Engineer SILICON VALLEY for EDA Careers at San Jose, CA
Upcoming Events
EMC PCB Design Integration at 13727 460 Ct SE North Bend WA - Jun 6 - 9, 2017
DAC 2017 Conference at Austin TX - Jun 18 - 22, 2017
2017 FLEX Conference at Monterey Conference Center 1 Portola Plaza, Monterey CA - Jun 19 - 22, 2017
MPSoc Forum 2017 - July 2 - 7, 2017, Les Tresoms Hotel, Annecy, France at Les Tresoms Hotel Annecy France - Jul 2 - 7, 2017
NEC: CyberWorkbench
ClioSoft
DAC2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy