ATSC 3.0 Physical Layer Standard Approved

Next-Generation Broadcast TV Transmission System Includes More than One Dozen Key Elements

WASHINGTON — (BUSINESS WIRE) — September 8, 2016 — The Advanced Television Systems Committee (ATSC) announced today that the Physical Layer transmission system for ATSC 3.0 next-generation television broadcasting has been approved as a Final Standard, signaling that the standardization process for the entire ATSC 3.0 process is nearing completion. ATSC members approved the ATSC 3.0 Physical Layer Candidate Standard through balloting completed yesterday.

“The hundreds of technology experts from around the world who have contributed their time and expertise to this process have selected the best and most flexible transmission system as the foundation of ATSC 3.0. While other ingredients of the ATSC 3.0 standard are still in the final stages of standardization, the approval of the over-the-air transmission system is a foundation for the future,” said ATSC President Mark Richer.

Flexible, Robust and Efficient

The ATSC 3.0 Physical Layer (ATSC A/322) offers far more flexibility, robustness and spectral efficiency than the current digital TV broadcast standard, which was approved by the Federal Communications Commission two decades ago. The new ATSC 3.0 Physical Layer allows television broadcasters to choose from a wide variety of transmission parameters so that each station can tailor its signal to best serve its local market by providing the combination of services and coverage area best suited for the market and its terrain.

“We’re likely to see both 4K Ultra HD broadcasts running side-by-side with robust mobile broadcasts to handheld devices, thanks to the innate flexibility of ATSC 3.0’s Physical Layer. The system will allow high-capacity modes when stunning video is more important. And it also permits lower-capacity transmissions with extremely high robustness for receivers on the go,” Richer explained.

Key capabilities of the ATSC 3.0 Physical Layer include use of Single Frequency Networks, multiple physical layer pipes, and channel bonding. Selected technologies allow for data transmission with a wide range of guard intervals, forward error correction code lengths and code rates.

Progress and Momentum

Representing a major milestone for ATSC 3.0, final approval of the A/322 Physical Layer standard reflects the momentum behind next-gen TV. Work continues apace on the other elements of the suite of ATSC 3.0 standards. Earlier this year, the A/321 System Discovery and Signaling (colloquially called “the bootstrap”) part of the Physical Layer was standardized, and a number of other ATSC 3.0 standards are nearing the conclusion of the standardization process.

These Proposed and Candidate Standards will include Video and Audio Compression, high dynamic range (HDR), wide color gamut and immersive sound, closed captioning, advanced emergency alerting, security, companion devices, personalization, applications & interactivity, watermarking & fingerprinting, and Internet Protocol delivery.

All told, some 20 standards are expected to be part of the final ATSC 3.0 suite of standards by early next year.

About the ATSC: The Advanced Television Systems Committee is defining the future of television with the ATSC 3.0 next-generation broadcast standard. ATSC is an international, non-profit organization developing voluntary standards for digital television. The ATSC’s 150 member organizations represent the broadcast, broadcast equipment, motion picture, consumer electronics, computer, cable, satellite, and semiconductor industries. For more information visit  www.atsc.org.



Contact:

for ATSC
Dave Arland
317-701-0084
Email Contact




Review Article Be the first to review this article
 True Circuits: Ultra PLL

Aldec Webinar Nov 30

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Computer History Museum: the Future of War is Here
More Editorial  
Jobs
Principal PIC Hardware Controls Engineer for Infinera Corp at Sunnyvale, CA
Senior SW Developer for EDA Careers at San Jose, CA
Senior PIC Test Development Engineer for Infinera Corp at Sunnyvale, CA
ASIC Design Engineer for Infinera Corp at Sunnyvale, CA
REVISED***Director Product Line RF/IC for EDA Careers at San Jose, CA
Upcoming Events
“Empowering Leadership with WIT and WISDOM” at SEMI 673 South Milpitas Blvd. Milpitas CA - Nov 28, 2017
Artificial Intelligence and Convolution Neural Networks Discussion at San Jose State University Student Union Theater San Jose CA - Dec 4, 2017
Silicon Valley's Only Comprehensive Embedded Systems Conference at San Jose Convention Center 150 W. San Carlos St. San Jose CA - Dec 5 - 7, 2017
Oski Technology’s Decoding Formal Club Meeting at The Conference Center San Jose CA - Dec 7, 2017
TrueCircuits: IoTPLL



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise