NI AWR Design Environment Featured in Upcoming Workshops

EL SEGUNDO, CA, Aug. 24, 2016  -- NI AWR Design Environment will be showcased this fall in two hands-on workshops for modern digital radio design and filter design. The workshops take place in Southern California at NI’s El Segundo office, formerly AWR Corporation headquarters.

From Bits to Waves: Building a Modern Digital Radio in One Day | Sept. 9

Dr. David Ricketts of North Carolina State University will present a fun and interactive workshop in which attendees will use NI AWR software to learn the basic theory of modern digital radios, as well as the RF circuits and systems used to build them. After an introductory session on digital radios, participants will select an RF building block to design and build. There will be short mini-classes (run in parallel) on each component: double-balanced mixer, microstrip filter, low-noise amplifier, power amplifier, balun, and more. In the afternoon, the designs will be transferred to a printed circuit board (PCB) via a simple “PCB in a bag” method and each component will be built and tested using a simple vector signal analyzer (VNA). The workshop will conclude with a full radio test of at transmitter and receiver.

For details and to register, visit http://www.awrcorp.com/news/trainings/event/bits-waves-workshop-building-modern-digital-radio-1-day-0.

Advanced Filter Design Workshop | Sept. 13

Daniel Swanson, Jr. will present a one-day workshop focusing on detailed filter design examples using NI AWR Design Environment in conjunction with SW Filter Design software. In the morning session attendees will design a microstrip combline filter and in the afternoon a narrow-band, high Q-cavity combline filter. The same design strategy, based on Dishal’s method and port tuning, will be used for both filters. This is a “no math” approach to filter design that requires only simple algebra and no knowledge of filter synthesis techniques.

For details and to register, visit awrcorp.com/news/trainings/event/advanced-filter-design-workshop-0.

Where and When:

From Bits to Waves: Building a Modern Digital Radio in One Day
September 9, 2016

9:00 a.m. – 5:00 p.m.

1960 E. Grand Ave., Ste. 430, El Segundo, CA

Advanced Filter Design Workshop

September 13, 2016

9:00 a.m. – 4:00 p.m. 

1960 E. Grand Ave., Ste. 430, El Segundo, CA

 

AWR, AWR Design Environment, National Instruments, NI and ni.com are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies.




Review Article Be the first to review this article
Aldec

Featured Video
Jobs
Principle Electronic Design Engr for Cypress Semiconductor at San Jose, California
Senior Electrical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Director, Business Development for Kongsberg Geospatial at remote from home, Any State in the USA
Director, Business Development for Kongsberg Geospatial at Ottawa, Canada
Upcoming Events
IPC Technical Education - PCB Layout - Place and Route at Del Mar Fairgrounds 2260 Jimmy Durante Blvd. Del Mar CA - May 2, 2018
IPC Technical Education at Wisconsin Center 400 W Wisconsin Ave. Milwaukee WI - May 8, 2018
IPC High Reliability Forum at Embassy Suites: Baltimore-At BWI Airport 1300 Concourse Drive Linthicum MD - May 15 - 17, 2018
DownStream: Solutions for Post Processing PCB Designs
TrueCircuits: IoTPLL
DAC2018



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise