Toshiba Launches Illumination LED Driver IC with Single-Wire Input

- Built-in LDO and daisy-chain pins realize downsizing of LED modules

TOKYO — (BUSINESS WIRE) — June 30, 2016Toshiba Corporation's (TOKYO: 6502) Storage & Electronic Devices Solutions Company today announced the launch of “TB62D786FTG”, a new LED driver IC with single-wire input and 9-channel output, for amusement equipment and LED illumination applications. Full-scale production is scheduled to start this autumn.

This Smart News Release features multimedia. View the full release here: http://www.businesswire.com/news/home/20160630005455/en/

A new LED driver IC "TB62D786FTG" with single-wire input and 9-channel output. (Photo: Business Wire ...

A new LED driver IC "TB62D786FTG" with single-wire input and 9-channel output. (Photo: Business Wire)

The new product adopts a single-wire Manchester-encoded interface, which is generally used for wireless communications, and the number of input signals is reduced to one. In addition, built-in daisy-chain pins and a linear regulation circuit (LDO, 5V output) with up to 28V input improve the extendibility of the LED driver unit.

In a typical system, power supply has to be supplied to LED driver ICs and LEDs separately. Using the new product, the number of wires between a microcontroller (or a controller) and an LED driver unit mounting the new driver can be reduced to four wires (single power supply, single-wire input, single-wire daisy-chain output, and GND), and a single supply voltage operation unit with less wiring can be created with a compact package (VQFN24). This also allows the size of the LED unit board to be downsized.

Main Features of New Product
- Built-in single-wire interface
- Built-in daisy-chain pins
- Linear regulation circuit (LDO, 5V output) up to 28V input
- Compact package (VQFN24)

 

Main Specifications of New Product

Part number   TB62D786FTG
Input signal Single-wire input (5V system CMOS), transfer frequency 0.5MHz to 2MHz

Power supply
voltage

Built-in linear regulator (5V): 7 to 28V input

IC control voltage: 4.5 to 5.5 V

LED output 28V×85mA×9 channels constant current driver (5mA to 40mA recommended)

Illumination can be controlled with the PWM gradation, from 0 to 127

Hardcoded IDs Up to 64 driver IDs
Package P-VQFN24-0404-0.50-001
Sample price   110 yen (tax included)
 

1 | 2  Next Page »



Review Article Be the first to review this article

Aldec Simulator Evaluate Now

Featured Video
Jobs
Senior DSP Firmware Engineer for Cirrus Logic, Inc. at Austin, TX
Senior Formal FAE Location OPEN for EDA Careers at San Jose or Anywhere, CA
Design Verification Engineer for intersil at Morrisville, NC
Principal PIC Hardware Controls Engineer for Infinera Corp at Sunnyvale, CA
Senior PIC Test Development Engineer for Infinera Corp at Sunnyvale, CA
RF IC Design Engineering Manager for Intel at Santa Clara, CA
Upcoming Events
IC Open Innovation Panel During REUSE 2017 at Santa Clara Convention Center 5001 Great America Parkway Santa Clara CA - Dec 14, 2017
Essentials of Electronic Technology: A Crash Course at Columbia MD - Jan 16 - 18, 2018
Essentials of Digital Technology at MD - Feb 13 - 14, 2018
CST: Webinar series



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise