Advantest Ships 800th V93000 Port Scale RF Tester to Leading Chinese Semiconductor Packaging Assembly and Test Company

TOKYO, JAPAN -- (Marketwired) -- Jun 14, 2016 -- Leading semiconductor test equipment supplier Advantest Corporation (TSE: 6857) has installed its 800th V93000 Port Scale RF test system, with the landmark unit going into the production facility of Jiangsu Changjiang Electronics Technology Co. Ltd. (JCET), a leading Chinese semiconductor packaging assembly and test company in the Jiangsu Province of China. The newly installed system is equipped with a Pin Scale 1600 digital card, Port Scale RF subsystem and MB-AV8+ analog card to meet JCET's needs in testing RF-based system-on-chip (SoC) devices and 3G/4G/LTE RF transceivers for mobile phone applications.

"JCET was an early adopter of the V93000 Port Scale RF tester when it was launched in 2007," said Bob Wang, general manager of Integrated Circuit Business Unit at JCET. "We look forward to continuing our long-standing partnership with Advantest to optimize our testing capabilities and continue to reduce costs."

"The V93000 Port Scale RF system has set the standard in RF testing and gained wide acceptance among the leading wireless device makers, including fabless semiconductor companies in China and around the world," said Hans-Juergen Wagner, senior vice president of the SoC Product Group at Advantest Corporation. "It provides high performance and high utilization, allowing us to deliver to our customers the quality and cost of test they require for their RF devices."

A member of Advantest's versatile V93000 Smart Scale™ Generation of testers, the V93000 Port Scale RF system provides greater flexibility and scalability that enables unprecedented asset utilization, manufacturing flexibility and delivers the lowest cost of test. The V93000 Port Scale RF solution covers a variety of wireless standards and can handle a broad range of devices with different levels of complexity. On the low end, it covers cost-sensitive power amplifiers and IoT devices. On the high end, it is capable of highly parallel testing of RF devices including octal-site LTE-Advanced transceivers and highly integrated RF-SoCs.

About JCET
JCET is the top semiconductor assembly and test solutions provider in China. The company is also listed among the Top 5 OSATs Companies in the world in terms of revenue stream and has been steadily growing in market share over the years. With over 1,500 patents issued by the USPTO as of the end of 2015 and 784 patents granted by the State Intellectual Property Office of China, the JCET Group has a combined IP portfolio that is unmatched in the OSAT industry with a deep knowledge base that provides a powerful competitive advantage for customers in the marketplace. The company is the leader in TSV, RF-SiP and 3D-RDL, copper pillar bump, HD-FCBGA and 25µm thickness chips stacking, MEMS, MIS and PoP -- nine major fields of international IC technology -- and is in mass production of MIS, WL-CSP and SiP, CPB and flip-chip products.

About Advantest Corporation
A world-class technology company, Advantest is the leading producer of automatic test equipment (ATE) for the semiconductor industry and a premier manufacturer of measuring instruments used in the design and production of electronic instruments and systems. Its leading-edge systems and products are integrated into the most advanced semiconductor production lines in the world. The company also focuses on R&D for emerging markets that benefit from advancements in nanotech and terahertz technologies, and has introduced multi-vision metrology scanning electron microscopes essential to photomask manufacturing, as well as groundbreaking 3D imaging and analysis tools. Founded in Tokyo in 1954, Advantest established its first subsidiary in 1982, in the USA, and now has subsidiaries worldwide. More information is available at www.advantest.com.

Note: All information supplied in this release is correct at the time of publication, but may be subject to change without warning.

Advantest Corporation 
3061 Zanker Road
San Jose, CA 95134, USA
Judy Davies

Email Contact 





Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Job Openings: Can EDA Predict the Future
More Editorial  
Jobs
Engr, Elec Des 2 for KLA-Tencor at Milpitas, CA
Senior FPGA Designer for Fidus Electronic Product Development at Fremont, CA
Technical Support Engineer Germany/UK for EDA Careers at San Jose, CA
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Timing Design Engineer(Job Number: 17001757) for Global Foundaries at Santa Clara, CA
Upcoming Events
CDNLive Silicon Valley 2017 at Santa Clara Convention Center Santa Clara CA - Apr 11 - 12, 2017
10th Anniversary of Cyber-Physical Systems Week at Pittsburgh, PA, USA PA - Apr 18 - 21, 2017
DVCon 2017 China, April 19, 2017, Parkyard Hotel Shanghai, China at Parkyard Hotel Shanghai Shanghai China - Apr 19, 2017
Zuken Innovation World 2017 at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
Verific: SystemVerilog & VHDL Parsers



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy