MACOM Expands Industry Leading MMIC Portfolio With 1 Watt Power Amplifier

The new MAAP-011232 delivers high gain across the 100 MHz to 3.0 GHz frequency range

LOWELL, Mass. — (BUSINESS WIRE) — May 16, 2016 — MACOM Technology Solutions Inc. (“MACOM”), a leading supplier of high-performance RF, microwave, millimeterwave and photonic products, today introduced the MAAP-011232, a 2-stage, 1 Watt driver amplifier featuring gain shut off and operating from 100 MHz to 3 GHz. This device is suited to both driver and power requirements across a broad range of applications, including land-mobile-radio, military communications, sensors, telemetry, test and measurement and satellite communications.

This Smart News Release features multimedia. View the full release here: http://www.businesswire.com/news/home/20160516005452/en/

The MAAP-011232 features a typical gain of 23 dB and up 40% power added efficiency. The device can b ...

The MAAP-011232 features a typical gain of 23 dB and up 40% power added efficiency. The device can be operated between 5V to 9V and consumes less than 300 mA at maximum output power of 1 Watt. The MAAP-011232 device is fully matched while operating in the 100 MHz to 1GHz frequency range and can be tuned with input matched to perform up to 3 GHz. The device is offered in a 3mm 16 lead PQFN plastic package. (Photo: Business Wire)

The MAAP-011232 features a typical gain of 23 dB and up 40% power added efficiency. The device can be operated between 5V to 9V and consumes less than 300 mA at maximum output power of 1 Watt. The MAAP-011232 device is fully matched while operating in the 100 MHz to 1GHz frequency range and can be tuned with input matched to perform up to 3 GHz. The device is offered in a 3mm 16 lead PQFN plastic package.

“The MAAP-011232 was designed to offer customers excellent power and drive performance over a broad frequency range,” said Paul Beasly, Product Manager, RF and Microwave, MACOM. “The high gain and enable function can replace the need for additional gain blocks and/or attenuators in customers’ systems, which makes the device an ideal candidate for applications that require a small footprint and surface-mount solution.”

The table below outlines typical performance for the MAAP-011232:

Parameter   Units   MAAP-011232
Small Signal Gain   dB   23
Output Power at 1 dB Compression   dBm   29
Saturated Output Power   dBm   30
Power Added Efficiency   %   40
Reverse Isolation   dB   50
Output Third Order Intercept   dBm   40
Drain Supply Voltage   V   9

Production quantities and samples of MAAP-011232 are available from stock. Datasheets and additional product information can be obtained from the MACOM website at: www.macom.com .

1 | 2  Next Page »



Review Article Be the first to review this article
Aldec

Featured Video
Jobs
Principle Electronic Design Engr for Cypress Semiconductor at San Jose, California
Senior Electrical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Director, Business Development for Kongsberg Geospatial at Ottawa, Canada
Director, Business Development for Kongsberg Geospatial at remote from home, Any State in the USA
Upcoming Events
IPC Technical Education - PCB Layout - Place and Route at Del Mar Fairgrounds 2260 Jimmy Durante Blvd. Del Mar CA - May 2, 2018
IPC Technical Education at Wisconsin Center 400 W Wisconsin Ave. Milwaukee WI - May 8, 2018
IPC High Reliability Forum at Embassy Suites: Baltimore-At BWI Airport 1300 Concourse Drive Linthicum MD - May 15 - 17, 2018
DownStream: Solutions for Post Processing PCB Designs
TrueCircuits: IoTPLL
DAC2018



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise