USB 3.0 Promoter Group Defines Authentication Protocol for USB Type-C™

Specification defines policy for product OEMs to mitigate risks from non-compliant devices

Shenzhen, China and Beaverton, OR, USA – The USB 3.0 Promoter Group today announced the USB Type-C™ Authentication specification, defining cryptographic-based authentication for USB Type-C™ chargers and devices. Using this protocol, host systems can confirm the authenticity of a USB device or USB charger, including such product aspects as the descriptors/capabilities and certification status. All of this happens right at the moment a wired connection is made – before inappropriate power or data can be transferred.

USB Type-C™ Authentication empowers host systems to protect against non-compliant USB Chargers and to mitigate risks from maliciously embedded hardware or software in USB devices attempting to exploit a USB connection. For a traveler concerned about charging their phone at a public terminal, their phone can implement a policy only allowing charge from certified USB chargers. A company, tasked with protecting corporate assets, can set a policy in its PCs granting access only to verified USB storage devices.

“USB is well-established as the favored choice for connecting and charging devices,” said Brad Saunders, USB 3.0 Promoter Group Chairman. “In support of the growing USB Type-C ecosystem, we anticipated the need for a solution extending the integrity of the USB interface. The new USB Type-C Authentication protocol equips product OEMs with the proper tools to defend against ‘bad’ USB cables, devices and non-compliant USB Chargers.”

“USB-IF is unwavering in our mission to solidify USB Type-C as the single cable of the future,” said Jeff Ravencraft, USB-IF President and COO. “USB Type-C Authentication is an important contribution to enable a thriving ecosystem of compliant, interoperable products.”

Key characteristics of the USB Type-C™ Authentication solution include:

  • A standard protocol for authenticating certified USB Type-C™ Chargers, devices, cables and power sources ï‚·
  • Support for authenticating over either USB data bus or USB Power Delivery communications channels 
  • Products that use the authentication protocol retain control over the security policies to be implemented and enforced
  • Relies on 128-bit security for all cryptographic methods
  • Specification references existing internationally-accepted cryptographic methods for certificate format, digital signing, hash and random number generation

"With its long experience and success in embedded-device security, STMicroelectronics, a USB-IF Board member and Promoter, knows how important authentication, validation, and protection is to the success and fast adoption of USB Type-C," said Joel Huloux, Director Standards & Industry Alliances at STMicroelectronics. "Consumers and the entire industry can rest-assured knowing strong authentication for USB Type-C is the key security pillar of this specification.”

Developer Update

To further enable USB Type-C™ Authentication and the USB Type-C™ ecosystem, the USB 3.0 Promoter Group also released one revision and one new specification. The following updates are developer-only; the recommended consumer and end-user terminology for USB Power Delivery (USB PD) is unchanged.

USB Power Delivery 3.0, the new revision of the USB Power Delivery specification, adds incremental features to the existing USB Power Delivery 2.0 specification. These features include enabling authentication message exchange over the USB PD communications channel for standard USB Type-C™ to USB Type-C™ cables. The new USB Type-C™ Bridging specification provides the necessary method for bridging messages to and from a USB PD link over the USB data bus. USB Type-C™ Bridging enables a USB host to communicate with the USB PD interface of a downstream port in a connected USB hub, among other capabilities.

About the USB 3.0 Promoter Group

The USB 3.0 Promoter Group, comprised of Hewlett-Packard Company, Intel Corporation, Microsoft Corporation, Renesas Electronics, STMicroelectronics, and Texas Instruments, developed the USB 3.0 Specification that was released in November 2008. In addition to maintaining and enhancing this specification, the USB 3.0 Promoter Group develops specification addendums (USB Power Delivery, USB Type-C, and others) to extend or adapt its specifications to support more platform types or use cases where adopting USB 3.0 technology will be beneficial in delivering a more ubiquitous, richer user experience.

About the USB-IF

The non-profit USB Implementers Forum, Inc. was formed to provide a support organization and forum for the advancement and adoption of USB technology as defined in the USB specifications. The USB-IF facilitates the development of high-quality compatible USB devices through its logo and compliance program, and promotes the benefits of USB and the quality of products that have passed compliance testing. Further information, including postings of the most recent product and technology announcements, is available by visiting the USB-IF website at



Brad Saunders
USB 3.0 Promoter Group
+1 503-264-0817
Email Contact

Liz Nardozza
+1 503-619-5224
Email Contact

Review Article Be the first to review this article

Featured Video
Senior Electrical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Upcoming Events
SEMICON Southeast Asia 2018 at New Malaysia International Trade & Exhibition Centre (MITEC) Kuala Lumpur Malaysia - May 22 - 24, 2018
Methodics User Group Meeting at Maxim Integrated 160 Rio Robles San Jose CA - Jun 5 - 6, 2018
IEEE 5G World FOrum at 5101 Great America Parkway Santa Clara CA - Jul 9 - 11, 2018
PCB WEST 2018 Conference & Exhibition at Santa Clara Convention Center Santa Clara CA - Sep 11 - 13, 2018

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise