CAN FD Plug Fest Shows Robust Operation of Controller IP Core by CAST and Fraunhofer IPMS

Soft IP Core for CAN FD met or exceeded bit rate and error handling tests in its second plug fest, running in representative automotive networks from Ford and GM

Detroit, Michigan, April 15, 2016 — The CAN Bus Controller offered by intellectual property provider CAST, Inc. has successfully undergone a second round of real-world-like testing at the CAN Plug Fest run by the CAN in Automation association at Ford’s facility in Detroit.

The CIA CAN FD Plug Fest April 6 and 7 gathered twenty firms to evaluate how well their respective CAN Flexible Data bus protocol products work together in network topologies that emulate actual automobile environments. These rigorous tests of error handling and interoperability go beyond specification conformance to evaluate how well a data link or physical layer CAN controller product might perform in the real world, where robustness is life critical.

Sourced from Fraunhofer IPMS, the CAN-CTRL CAN 2.0 & FD Controller Core is one of the few ASIC RTL and FPGA netlist IP cores to support all current and proposed specifications (CAN 2.0, CAN FD ISO and Bosch, and Time-Triggered TTCAN). It is also the first soft IP core to undergo a second year of CIA Plug Fest testing. It did well last year, and improvements based on that experience helped it exceed even the developer’s expectations in last week’s testing.

“The controller performed very well, with no major issues at higher than standard bit rates and against conformance tests being prepared for the upcoming ISO 16845-2 international standard,“ said Dr. Frank Deicke, business unit manager, Wireless Microsystems, Fraunhofer Institute for Photonic Microsystems (IPMS). “Moreover, we coupled our data link controller core with the latest physical transceivers from On Semi, NXP, and Infineon, and were the only participants using these vendors’ latest CAN FD implementations.”

CAST and IPMS will also participate in the CIA’s June CAN FD Plug Fest in Nuremberg. Read more about the Detroit and Nuremberg events in the CAN Newsletter Online.

The CAN FD Controller IP Core is available now through CAST worldwide, with a reference design board and other development aids plus Verification IP from partner Avery Design Systems. Visit www.cast-inc.com for more information.  # # #



Read the complete story ...


Review Article Be the first to review this article
CST: Webinar October 19, 2017

Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
DVCon Europe 2017: Munich and So much more
More Editorial  
Jobs
FPGA Engineer for Teradyne Inc at San Jose, CA
Field Application Engineer for Teradyne Inc at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Analog Hardware Engineer for Teradyne Inc at San Jose, CA
Upcoming Events
Preparing for the Cognitive Era: Education, Occupation and You at SJSU Student Union Theater 211 South 9th Street San Jose CA - Oct 18, 2017
11th International Symposium on Networks-on-Chip (NOCS 2017) at Seoul Korea (South) - Oct 19 - 20, 2017
15th IEEE/ACM ESTIMedia 2017 at Seoul Korea (South) - Oct 19 - 20, 2017
ESTIMedia 2017 at Seoul Korea (South) - Oct 19 - 20, 2017
CST: Webinar series



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise