Connections for ASSET’s SourcePoint software debugger simplified to USB3 for Intel systems with DCI

Most portable systems do not have the board space to accommodate the much larger 60-pin XDP or MIPI connectors

Apr 13, 2016 -- A new system controller for ASSET® InterTech’s SourcePoint™ hardware-assisted software debug platform allows engineers to begin software debug immediately by offering a fast and easy way to connect SourcePoint to Intel®-based target platforms that support Direct Connect Interface (DCI).

The new system controller, called the Closed Chassis Controller (CCC), features USB3 connectivity rather than Intel’s legacy 60-pin XDP connector or a MIPI60 connector. Many portable systems like laptops or tablets do not have the board space available for the much larger XDP or MIPI connectors and yet they still require connectivity to a debugger. All three of the Intel connectivity options for hardware-assisted software debuggers rely on the IEEE 1149.1 JTAG standard. The XDP and MIPI60 connectors implement the JTAG interface in hardware while the USB3 interface will make use of DCI and incorporate the JTAG protocols as a sideband.  

“The software engineer can only start debugging the system’s software and firmware after SourcePoint is connected to the target platform and more and more systems today just don’t have the space for a 60-pin XDP or MIPI connector,” said Larry Osborn, ASSET’s product manager for SourcePoint. “This is a particular problem for many embedded applications, such as nodes in an Internet of Things (IoT), because these nodes are often very small devices. With the CCC and because of the popularity of USB connectivity, there should be no delay as long as the Intel platform supports DCI. Just hook up the SourcePoint and start debugging.”

As a system controller, the CCC also provides connectivity to Ethernet networks and the Internet cloud. As a result, developers can remotely access a target platform connected to a CCC. This would allow a geographically dispersed development team to collaborate while debugging a target platform’s firmware or software.

ASSET’s SourcePoint is a platform of debug and trace tools for C/C++ embedded software and firmware. The CCC system controller and SourcePoint platform have been optimized for Intel Core™, Atom™ and Xeon® processors. The CCC supports a number of common use cases, including initial cold boot, suspend state-operations and survival, and reset sequences.


The CCC controller for SourcePoint is available now from ASSET InterTech and its distributors. The SourcePoint debugger is sold separately. For product information, call 888-694-6250, fax 972-437-2826, e-mail Email Contact or visit

About ASSET InterTech

ASSET InterTech ( is a leading supplier of tools to debug, validate and test software and hardware. The company’s SourcePoint™ software debug and trace platform and ScanWorks® platform for embedded instruments work in tandem to give engineers real insight from code to silicon. SourcePoint is a best-in-class, powerful debugger that includes advanced trace tools to gather data from code and quickly debug complex embedded software systems. ScanWorks controls instruments embedded in chips to test and validate chips and circuit boards. Together they empower engineers with tools and technology for the entire life-cycle of a system, beginning with software and hardware development, continuing through design validation and software/hardware integration, and eventually supporting the testing of the product in manufacturing and field service. ASSET InterTech is located at 2201 North Central Expressway, Suite 105, Richardson, TX 75080.

Follow us on:




You Tube:

Our blog – Test Data Out:





Read the complete story ...

Review Article Be the first to review this article


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
2016 International Conference On Computer Aided Design at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
ICCAD 2016, Nov 7-10, 2016 at Doubletree Hotel in Austin, TX at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy