JEDEC Publishes Universal Flash Storage (UFS) Removable Card Standard

ARLINGTON, Va., USA –  JEDEC Solid State Technology Association, the global leader in the development of standards for the microelectronics industry, today announced the publication of JESD220-2 Universal Flash Storage (UFS) Card Extension Standard. The new removable memory card standard standardizes functionality that aligns with the popular UFS embedded device standard. JESD220-2 is available for free download from the JEDEC website. 

UFS is a high performance interface designed for use in computing and mobile systems such as smart phones and tablets where power consumption needs to be minimized. Its high speed serial interface and optimized protocol enable significant improvements in throughput and mobile system performance. The new UFS card standard provides a leading-edge removable storage solution while maintaining sequential and random IOPs performance that is critical for future mobile markets. Even using a single lane the UFS 1.0 card offers 600 MB/s interface speed in both directions and a state-of-the-art queuing mechanism to further increase system throughput.

Features of the UFS card are the same as those defined in the UFS 2.0 embedded device standard:

  • Based on the UFS 2.0 standard and compatible with the UFS HCI 2.0 standard
  • Supports MIPI® M-PHY® HS-Gear3, HS-Gear2 (optional), and PWM-Gear1
  • A detailed mechanical definition is defined by the JEDEC MO-320 outline
  • Features common to embedded UFS 2.0 devices:
    • Support for multiple logical units, each with configurable characteristics
    • Reliable write and background operations
    • Secure operations such as purge and erase to enhance data security
    • Includes write protection options, including permanent and power-on write protection
    • Provides task management and power management functionality

To optimize for cost, complexity, and assist with rapid implementation of the new UFS 1.0 card standard, product designers and engineers should note the following key areas of simplification from the embedded UFS 2.0 standard:

  • MIPI M-PHY single-lane operation
  • HW RESET signal not supported in UFS card
  • Ref_clock of 26Mhz and 19.2Mhz only
  • VCCQ supply eliminated
  • Boot capability not supported at this time

“JEDEC’s new UFS card standard offers many of the features and much of the same high-end functionality as the UFS embedded device standard, but in a convenient, removable card format that would be well suited for most mobile devices,” said Mian Quddus, Chairman of the JEDEC Board of Directors and the JC-64 Committee for Embedded Memory Storage and Removable Memory Cards. He added, “JC-64 is dedicated to fulfilling the storage requirements of the mobile industry by offering product designers a range of options to better meet their needs.”

Industry Support

Samsung:  “Embedded UFS has been proven to deliver the best performance and highest power efficiency of any storage in the mobile industry,” said Kenny Han, vice president, NAND product planning, Samsung Electronics. “It is only natural that this exemplary performance is being passed on to removable cards in extending the functionality of consumer mobile devices. The new UFS card standard will more than meet the needs of technologies that are the vanguard of the mobile industry today like 360-degree video and Drones with multiple 4K/8K recording cameras as well as smartphones which are beginning to evolve into intelligent hubs for IoT and mobile environments.”

About JEDEC

JEDEC is the global leader in the development of standards for the microelectronics industry. Thousands of volunteers representing nearly 300 member companies work together in 50 JEDEC committees to meet the needs of every segment of the industry, manufacturers and consumers alike. The publications and standards generated by JEDEC committees are accepted throughout the world.  All JEDEC standards are available for free download from the JEDEC website. For more information, visit  www.jedec.org.

 

Contact:

Emily Desjardins
Email Contact
703-907-7560




Review Article Be the first to review this article
 True Circuits: IOT PLL

Aldec Simulator Evaluate Now

Featured Video
Jobs
Senior Formal FAE Location OPEN for EDA Careers at San Jose or Anywhere, CA
Applications Engineer for intersil at Palm Bay, FL
RF IC Design Engineering Manager for Intel at Santa Clara, CA
Design Verification Engineer for intersil at Morrisville, NC
Senior PIC Test Development Engineer for Infinera Corp at Sunnyvale, CA
Upcoming Events
Essentials of Electronic Technology: A Crash Course at Columbia MD - Jan 16 - 18, 2018
Essentials of Digital Technology at MD - Feb 13 - 14, 2018
IPC APEX EXPO 2018 at San Diego Convention Center San Diego CA - Feb 24 - 1, 2018
CST: Webinar series
TrueCircuits: IoTPLL



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise