Toshiba Launches General-Purpose System Power IC for Automotive Functional Safety

TOKYO — (BUSINESS WIRE) — December 15, 2015Toshiba Corporation (TOKYO:6502) today announced the launch of "TB9044FNG", a general-purpose system power IC with multiple outputs achieving functional safety[1] for automotive applications. Sample shipments start today, with the mass production scheduled to start in October, 2017.

This Smart News Release features multimedia. View the full release here: http://www.businesswire.com/news/home/20151215005721/en/

Toshiba: "TB9044FNG", a general-purpose system power IC with multiple outputs achieving functional s ...

Toshiba: "TB9044FNG", a general-purpose system power IC with multiple outputs achieving functional safety for automotive applications. (Photo: Business Wire)

More and more safety-critical automotive systems, such as electric power steering (EPS) and braking, are required to meet the requirements of ASIL-D[2], the highest automotive safety integrity level prescribed in the ISO 26262 functional safety standards.

The new IC integrates various failure detection functions, such as high-voltage and low-voltage detection and overheat detection of power supply circuit, to monitor against the IC’s own failure, and a watchdog timer to monitor failure detection of the external microcomputer. An initial diagnosis circuit to detect latent faults in the failure detection circuits is also incorporated to secure higher functional safety.

Toshiba has also carried out a range of functional safety analyses to simulate system failures and will provide customers with documentation, such as functional safety FMEDA[3], to support overall safety analysis and design.

Key Features

  1. Various built-in monitoring circuits for functional safety
    Low-voltage detection circuit for battery power supply
    High-voltage detection circuit for DC-DC converter (6V)
    High-voltage / low-voltage detection circuit for series power supply (5V)
    Overheat detection circuit
    Oscillator frequency monitoring circuit
    Watchdog timer circuit monitoring the external MCU
  2. Diagnostic circuit for failure detection circuits for functional safety
    A built-in diagnostic circuit in the failure-detection circuit detects any latent faults.
  3. Built-in buck-boost DC-DC converter
    The IC generates 6V output from a high efficiency buck-boost DC-DC converter.
    In consideration of voltage drop after idling reduction, the low side operating voltage range is improved down to 2.7V (min.) with battery operation.
  4. Built-in 4 series power supply[4] circuits (4 outputs)
    The IC incorporates four series power supply circuits receiving the 6V input generated by the DC-DC converter.
    It also incorporates a circuit with a 5V constant voltage (current capacity is 400mA) for the microcomputer, and three circuits with 5V constant voltage output (current capacity is 100mA) for sensors and other interfaces. Each of them can output a voltage independently.
  5. Selectable operation for failure detections
    Customers can set the system to respond to detected failures in one of two ways, using the SPI [5] communication input setting. One setting outputs a reset signal to the system; the other provides notification of the abnormal operation to the system. Selection can be made according to the customer’s application or system.
 

Main Specifications

Part Number   TB9044FNG
Mass Production October 2017
Mass Production Size 1 million pcs/year
Output Voltage 400mA Output(1 circuit):5.0V±0.1V

100mA Output(3 circuits): 400mA Output(1 circuit) ±20mV

Output Current 400mA Output(1 circuit), 100mA Output(3 circuits)
Operating Voltage Range +2.7 to 18V
Monitoring Function *Low-voltage detection circuit of the battery power supply

*High-voltage detection circuit of the DC-DC converter (6V)

*High-voltage/low-voltage detection circuit of series power supply (5V)

*Overheat detection circuit

*Oscillator frequency monitoring circuit

*Watchdog timer circuit monitoring the external MCU

Power On Reset POR time is adjustable by the external capacitance value.
Watchdog Timer Window type (Times of over high-speed detection and under low-speed detection are independently adjustable.)
Watchdog Stop Control Customers can use the Watchdog timer Select (WS) terminal to select “either” to operate or to stop the watchdog timer.
Operating Temperature Range -40 to 125 o C
Package   HTSSOP48-P-300-0.50(6.1mm×12.5mm×1.0mm)
 

1 | 2  Next Page »



Review Article Be the first to review this article
 True Circuits: IOT PLL

Featured Video
Jobs
Currently No Featured Jobs
Upcoming Events
MAPPS 2018 Summer Conference at The Belmond Charleston Place Charleston SC - Jul 22 - 25, 2018
International Test Conference India 2018 at Bangalore India - Jul 22 - 24, 2018
SRTC-2018 at The Leela Ambience Gurugram NEW DELHI India - Jul 25 - 26, 2018
MPSoC Forum 2018 at The Cliff Lodge 9320 South Cliff Lodge Drive Snowbird UT - Jul 29 - 3, 2018
DownStream: Solutions for Post Processing PCB Designs
TrueCircuits: UltraPLL



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise