Toshiba Starts Mass Production of System Power Supply ICs for Medium-Sized LCD Modules for Car Navigation Systems

TOKYO — (BUSINESS WIRE) — June 4, 2015Toshiba Corporation's (TOKYO: 6502) Semiconductor & Storage Products Company today announced the start of mass production of “TC7735FTG”, a system power supply IC with 5 different voltage power outputs, for the medium-sized LCD modules typically used in car navigation systems.

This Smart News Release features multimedia. View the full release here: http://www.businesswire.com/news/home/20150604005487/en/

Toshiba: System power supply IC "TC7735FTG" for medium-sized LCD used in car navigation systems (Pho ...

Toshiba: System power supply IC "TC7735FTG" for medium-sized LCD used in car navigation systems (Photo: Business Wire)

The IC integrates an automatic buck-boost DC-DC converter, which provides stable power supply to LCD panels with a wide operating voltage range, from 4.5 to 16V. This feature supports power supply directly connected from car batteries and suits car navigation systems.

The IC integrates an OTP memory[1], allowing it to store different power control set-up data adjusted for each LCD module, removing the need for adjustment of the system by external control.

Key Features

  • 5 built-in power outputs.
  • Wide operating voltage range, from 4.5 to 16V.
  • Selectable switching frequency: built-in oscillator (1MHz) or external clock input (400kHz-1.2MHz)
  • Automatic buck-boost converter that identifies input voltage and selects operation mode (buck or boost), eliminating control by external command.
  • Built-in OTP for adjustable power control of each LCD
  • Safety functions: input under-voltage detection; Input over-voltage detection; thermal shutdown; and output over-voltage detection

Application examples

LCD modules for car navigation systems and digital photo frames

 

Main Specifications

 
Part Number   TC7735FTG
Operating Temperature   Topr -40 to 85 degree C
Operating Voltage Vin 4.5 to 16V
Setting Built-in OTP write Output voltage

Power sequence

Output Voltage Range CH1:Automatic Buck-Boost DC-DC converter 5V to 15V
CH2: Buck DC-DC converter 3V to 5V
CH3: Positive charge pump 14V to 22V
CH4: Negative charge pump -5V to -15V
Operational amplifier for VCOM 0.5 to 7.5V (Vout1-0.6V max)
* Vout1 is output voltage of CH1
Package   QFN32pin(5mm x 5mm)
 

1 | 2  Next Page »



Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs


Featured Video
Editorial
Peggy AycinenaIP Showcase
by Peggy Aycinena
Grant Pierce: Grand Challenges in IP
More Editorial  
Jobs
Technical Support Engineer for EDA Careers at Freemont, CA
LVS for PDK Design Engineer SILICON VALLEY for EDA Careers at San Jose, CA
LVS PEX DESIGN ENGINEERS SILICON VALLEY for EDA Careers at San Jose, CA
Upcoming Events
Automotive E/E Architecture China Conference at Shanghai China - May 25 - 26, 2017
EMC PCB Design Integration at 13727 460 Ct SE North Bend WA - Jun 6 - 9, 2017
DAC 2017 Conference at Austin TX - Jun 18 - 22, 2017
2017 FLEX Conference at Monterey Conference Center 1 Portola Plaza, Monterey CA - Jun 19 - 22, 2017
Verific: SystemVerilog & VHDL Parsers
DAC2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy