UltraSoC and Teledyne LeCroy Collaborate to Unify Debug and Validation for System Designers

SANTA CLARA, Calif. and CAMBRIDGE, England, May 19, 2015 — (PRNewswire) —  UltraSoC and Teledyne LeCroy today announce that they will collaborate on debug and validation technologies to reduce time-to-market and overall development costs in a wide range of high-tech industries, from automotive and computer peripheral manufacture, to emerging IoT applications.

Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types.

Teledyne LeCroy, the worldwide leader in protocol test solutions, delivers a range of hardware and software tools that enables engineers to verify, test, debug, and validate electronic system designs. UltraSoC provides silicon IP for data acquisition and analysis that can be "baked-in" to the complex semiconductor devices (System on Chip or SoC) at the heart of such designs. The combination of Teledyne LeCroy's ability to provide a high-level view of system behavior and UltraSoC's capabilities to offer visibility deep within the SoC creates a powerful toolset that allows the engineer to quickly and instinctively understand the system's operation, spot problems and devise solutions.

These joint developments will benefit designers of a broad range of end-products. For example, hard disk manufacturers could combine protocol analysis of the external system-level interfaces, such as SATA, gathered via one or more Teledyne LeCroy instruments, with data gathered internally to the drive's controller chip by UltraSoC's UltraDebug technology. This capability will enable system developers to track information, including time sensitive events, as it flows from one side of an interface to another and correlate it with internal software execution.

"Teledyne LeCroy is the leading name in protocol test; electronic design engineers around the world rely upon their solutions every day," said Rupert Baines, UltraSoC CEO.  "We believe that the combination of UltraSoC and Teledyne LeCroy technology will put a powerful and unique capability in the hands of those engineers, not just making their job easier but also fostering innovation and problem-solving."

Joe Mendolia, Vice President of Marketing at Teledyne LeCroy, commented:  "Building dedicated debug and analytics IP into semiconductor devices dramatically eases the task of post-silicon validation and debug, one of the key bottlenecks in time-to-market today.  UltraSoC's technology allows SoC designers to put together IP and processing cores from multiple vendors, with a unified on-chip analytics capability. Teledyne LeCroy's key strengths are clearly complementary – in acquiring, displaying, and contextualizing such data.  We're delighted to be working together."

Loring Wirbel, Senior Analyst with The Linley Group, commented: "As systems are growing more complex but development resources are stretched, anything that can accelerate debug, integration and time-to-volume becomes critical.  We are seeing SoC companies and end-users placing far greater emphasis on development and debug early on in the design flow. Partnerships like this can significantly help both chip development and system level debug, and are an essential tool for anyone planning a complex development."

Joint work by the two companies will build on the capabilities of Teledyne LeCroy's protocol analysis instruments, CrossSync and InSight tools, combining these with UltraSoC's UltraDebug technology.

The two companies will disclose further details of the collaboration at the upcoming 52nd Design Automation Conference (DAC) at San Francisco's Moscone Center, June 7 – 11, 2015 on UltraSoC's Booth (#3501).

Ends

About UltraSoC

UltraSoC is an independent provider of SoC infrastructure that enables rapid development of embedded systems based on advanced SoC devices and is headquartered in Cambridge, United Kingdom.

For more information visit www.ultrasoc.com

About Teledyne LeCroy

Teledyne LeCroy is a leading manufacturer of advanced test instruments that measure, analyze, and verify complex electronic signals. The Company offers high-performance oscilloscopes and protocol test solutions used by electronic design engineers in a wide range of application and end markets. Teledyne LeCroy is based in Chestnut Ridge, N.Y. For more information, visit Teledyne LeCroy's website at teledynelecroy.com

UltraSoC Media Contact:

Andy Gothard, UltraSoC

+44 7768 082 044


Andy.gothard@ultrasoc.com 


Twitter:

@ultrasoc


Teledyne LeCroy Media:

Peter Fletcher, TechniPubs

(408) 373-5601

Teledyne LeCroy Technical Contact:

Roy Chestnut, Product Line Manager

(408) 486-7234

Customer Contact:

Teledyne LeCroy PSG Customer Care Center 

(800) 909-7112

Website:

teledynelecroy.com


 

Logo - http://photos.prnewswire.com/prnh/20130123/NE46632LOGO 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/ultrasoc-and-teledyne-lecroy-collaborate-to-unify-debug-and-validation-for-system-designers-300085558.html

SOURCE Teledyne LeCroy

Contact:
Teledyne LeCroy
Design Automation Conference (DAC)
Web: http://teledynelecroy.com




Review Article Be the first to review this article
CST Webinar Series

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
Upcoming Events
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy