UMC Reports First Quarter 2015 Results

28nm contribution reaches 9% of sales; total shipments in 2Q expected to remain firm

(PRNewswire) —

First Quarter 2015 Overview1:

  • Revenue: NT$37.65 billion (US$1.20 billion)
  • Gross margin: 24.3%; operating margin: 10.9%
  • Foundry revenue from advanced nodes: 9% from 28nm, 24% from 40nm
  • Foundry capacity utilization rate: 93%
  • Net income attributable to the stockholders of the parent: NT$3.98 billion (US$127 million)
  • Earnings per share: NT$0.32; earnings per ADS: US$0.051

United Microelectronics Corporation (NYSE: UMC; TWSE: 2303) ("UMC" or "The Company"), a leading global semiconductor foundry, today announced its consolidated operating results for the first quarter of 2015.

Revenue was NT$37.65 billion, with gross margin at 24.3% and operating margin at 10.9%. Net income attributable to the stockholders of the parent was NT$3.98 billion, with earnings per ordinary share of NT$0.32.

Mr. Po-Wen Yen, CEO of UMC, said "In the first quarter of 2015, our foundry revenue grew to NT$36.00 billion. Overall capacity utilization remained at 93%, bringing wafer shipments to 1.48 million 8-inch equivalent wafers. While 8" fabs continued to run at full capacity, 12" fabs recorded higher wafer shipments during 1Q15. Revenue contribution from 28nm and 40nm increased to 9% and 24% respectively, reflecting strong wafer demand for our leading edge technologies that helped enhance blended wafer ASP. For 2Q15, we anticipate wafer shipments to remain at similar levels as 1Q15, despite end-market uncertainties and customer inventory adjustments. We will pay close attention to market developments and adapt to any possible changes that may unfold. While progress continues on advanced logic, we have also qualified 55nm low power embedded flash IP from SST and Faraday to target auto, general purpose MCU, SIM/smartcard and Internet of Things (IoT) IC designs. The proliferation of connected devices will help UMC to realize more growth opportunities as these products will adopt our comprehensive logic/mixed-mode and specialty technologies."

CEO Yen continued, "With regards to UMC's global expansion progress, in March we held a groundbreaking ceremony in Xiamen, China to kick-off the construction of our new 12" fab project. When the building structure is completed, we expect the fab cleanroom to be ready for equipment move-in by 2Q 2016, with initial production scheduled for late 2016. For our flagship 12" Tainan fab, we recently held a public earth day event to promote environmental awareness to the community. As Taiwan experiences the worst drought in 10 years, UMC has committed to adopt more stringent measures on water & energy conservation and step up our efforts on waste reduction. With UMC's effective conservation infrastructure in place, our fabs' water recycling efficiency has reached up to 88%, saving more than 20 million tons of water in 2014. We have set higher goals to further reduce resource use by an additional 10% over current levels by 2020. In addition, UMC's Board of Directors proposed a dividend payout of NT$0.55 per share for fiscal 2014, which strikes a balance between business expansion and return on shareholder equity. We believe our commitment to manufacturing excellence with a focus on global expansion will secure UMC's long-term returns and enhance profitability to ensure shareholder value."

Summary of Operating Results

Operating Results

(Amount: NT$ million)

  1Q15

  4Q14

QoQ %
change

 1Q14

YoY %
change

Net Operating Revenues

37,650

37,235

1.1

31,694

18.8

Gross Profit

9,155

10,186

(10.1)

5,901

55.1

Operating Expenses

(4,914)

(5,672)

(13.4)

(5,016)

(2.0)

Net Other Operating Income and Expenses

(142)

18

-

56

-

Operating Income

4,099

4,532

(9.6)

941

335.6

Net Non-Operating Income and Expenses

255

843

(69.8)

351

(27.4)

Net Income Attributable to Stockholders of the Parent

3,980

4,563

(12.8)

1,180

237.3

EPS   (NT$ per share)

0.32

0.36


0.09


       (US$ per ADS)

0.051

0.058


0.014



1 | 2 | 3 | 4 | 5 | 6  Next Page »



Review Article Be the first to review this article
CST: Webinar November 9, 2017

Synopsys: Custom Compiler

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
DVCon Europe 2017: Munich and So much more
More Editorial  
Jobs
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Upcoming Events
25th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC 2017) at Yas Viceroy Abu Dhabi Yas Marina Circuit, Yas Island Abu Dhabi United Arab Emirates - Oct 23 - 25, 2017
ARM TechCon 2017 at Santa Clara Convention Center Santa Clara CA - Oct 24 - 26, 2017
MIPI DevCon Bangalore 2017 at The Leela Palace Bengaluru India - Oct 27, 2017
MIPI DevCon Hsinchu City 2017 at Sheraton Hsinchu Hotel Taiwan - Oct 31, 2017
CST: Webinar series



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise