Wind River and MathWorks Integrate Leading Simulation Technologies for Advanced Model-Based Design

NEWS HIGHLIGHTS

  • Wind River delivers an integration between Simics and Simulink for processor-in-the-loop simulation to improve model-based design verification.
  • Simics enables early target hardware integration and validation in model-based design workflows.
  • Simics and Simulink integration allows testing of Simulink controller models on target architecture without the need for hardware boards and debugging tools.

ALAMEDA, Calif. — (BUSINESS WIRE) — April 13, 2015Wind River®, a world leader in delivering software for intelligent connected systems, is working with MathWorks to integrate Wind River Simics® with Simulink for improved model-based design workflows. This collaboration creates smarter system verification by enabling testing and co-simulation of combined design and platform models, and helps drive better designs while removing risk from future development, test, and integration. By alleviating these risks, this solution can be particularly valuable to engineering teams developing complex and safety-critical products for industries such as aerospace and defense, automotive, and industrial markets.

Model-based design is transforming the way engineers and scientists work by moving design tasks from the lab and field to the desktop. In model-based design, a system model is at the center of the development process, from requirements development through design, implementation, and testing. When software and hardware implementation requirements such as fixed-point and timing behavior are included in model-based design, teams can automatically generate code for embedded deployment and create test benches for  system verification, saving time and avoiding the introduction of manually coded errors.

As part of an ongoing collaboration with MathWorks, Wind River has integrated Simics with Simulink to support processor-in-the-loop (PIL) testing. Simulink is a block diagram environment for multi-domain simulation and model-based design, and has widespread usage for model-based design in the embedded system market. It supports simulation, automatic code generation, and continuous test and verification of embedded systems.

PIL testing checks that code generated from a Simulink controller model using Embedded Coder will run correctly on the actual processor that will be used in the final target system. Prior to PIL testing, control algorithms are typically developed and validated on the host, using a high-precision floating point math and with no concern for the implementation system and any cross development tools such as compilers that can impact on-target behavior. The Simics PIL integration for Simulink is available today for all Simics customers.

“With the Simulink–Simics PIL integration, MathWorks customers can reuse their Simulink system models to verify and assess code generated from Simulink control algorithms on their embedded processor without the need to use actual hardware boards and debugging tools,” said Paul Barnard, marketing director of design automation at MathWorks. “Simics-based PIL testing provides easy access to target systems enabling architecture-based testing and execution profiling early and often, reducing the risk of late-stage integration problems.”

“This Simics–Simulink PIL integration is a great example of how Simics addresses the need for access to sufficient numbers of hardware targets, dependable collaboration, and automation for greater efficiency. Model-based developers can more easily access embedded targets for testing, collaborate by saving and sharing controller software simulations, and better automate early-stage, hardware-specific testing with Simics simulations,” said Michel Genard, vice president and general manager of Simics at Wind River. “Using Simics in model-based design workflows allows software developers to run their model-based code sooner, transforming their project timelines.”

To learn more about using Simulink and Simics, register for the MathWorks webinar on May 7 at http://tinyurl.com/SimulinkSimics.

Simics integrates with many other simulation tools to create unique virtual systems for software development and testing. For more information on integrating Simics with simulation tools visit Wind River at www.windriver.com/simics/.

Simics is part of the Wind River Helix™ portfolio of products enabling Internet of Things (IoT) advancements. To learn more about how Wind River is addressing the opportunities and challenges from IoT, visit http://tinyurl.com/WindHelix.

About Wind River

Wind River, a wholly owned subsidiary of Intel® Corporation (NASDAQ: INTC), is a world leader in delivering software for intelligent connected systems. The company has been pioneering computing inside embedded devices since 1981, and its technology is found in nearly 2 billion products. Wind River offers the industry's most comprehensive embedded software portfolio, supported by world-class global professional services and support and a broad partner ecosystem. Wind River delivers the technology and expertise that enables the innovation and deployment of safe, secure, and reliable intelligent systems. To learn more, visit Wind River at www.windriver.com.


1 | 2  Next Page »



Review Article Be the first to review this article
CST: Webinar

Aldec Simulator Evaluate Now

Featured Video
Jobs
Senior DSP Firmware Engineer for Cirrus Logic, Inc. at Austin, TX
Senior PIC Test Development Engineer for Infinera Corp at Sunnyvale, CA
Design Verification Engineer for Cirrus Logic, Inc. at Austin, TX
DSP Tools Engineer for Cirrus Logic, Inc. at Austin, TX
Senior Formal FAE Location OPEN for EDA Careers at San Jose or Anywhere, CA
ASIC Hardware Engineer for BAE Systems Intelligence & Security at Arlington, VA
Upcoming Events
IC Open Innovation Panel During REUSE 2017 at Santa Clara Convention Center 5001 Great America Parkway Santa Clara CA - Dec 14, 2017
Essentials of Electronic Technology: A Crash Course at Columbia MD - Jan 16 - 18, 2018
Essentials of Digital Technology at MD - Feb 13 - 14, 2018
CST: Webinar series



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise