EDA Consortium Reports Record Revenue For Q4 2014 And For The Year

SAN JOSE, Calif., April 13, 2015 — (PRNewswire) —  The EDA Consortium (EDAC) Market Statistics Service (MSS) today announced that the Electronic Design Automation (EDA) industry revenue increased 11.9 percent for Q4 2014 to a record $2104 million, compared to $1880.5 million in Q4 2013. Sequential EDA revenue for Q4 2014 increased 15.1 percent compared to Q3 2014, while the four-quarters moving average, which compares the most recent four quarters to the prior four quarters, increased by 7.3 percent.

"The fourth quarter revenue represents both a record quarter and the culmination of a record year for the EDA industry," said Walden C. Rhines, board sponsor for the EDAC MSS and chairman and CEO of Mentor Graphics. "IC Physical Design and Semiconductor IP both reported double digit growth in Q4. Geographically, the Americas as well as Asia-Pacific had record quarters with double digit growth in those regions."

Companies that were tracked employed a record 31,735 professionals in Q4 2014, an increase 6.2 percent compared to the 29,880 people employed in Q4 2013, and up 0.3 percent compared to Q3, 2014.

The complete, quarterly MSS report, containing detailed revenue information broken out by both categories and geographic regions, is available to members of the EDA Consortium.

Revenue by Product Category
The largest category, Computer Aided Engineering (CAE), generated revenue of $699.5 million in Q4 2014, which represents a 3.1 percent decrease compared to Q4 2013. The four-quarters moving average for CAE decreased 1.3 percent.

IC Physical Design & Verification revenue was $483.7 million in Q4 2014, a 25.9 percent increase compared to Q4 2013. The four-quarters moving average increased 4.7 percent.

Printed Circuit Board and Multi-Chip Module (PCB & MCM) revenue of $176.2 million for Q4 2014 represents a decrease of 7.6 percent compared to Q4 2013. The four-quarters moving average for PCB & MCM increased 5.1 percent.

Semiconductor Intellectual Property (SIP) revenue totaled $642.8 million in Q4 2014, a 32 percent increase compared to Q4 2013. The four-quarters moving average increased 22.1 percent.

Services revenue was $101.6 million in Q4 2014, an increase of 4.9 percent compared to Q4 2013. The four-quarters moving average increased 6.1 percent.

Revenue by Region
The Americas, EDA's largest region, purchased $935.4 million of EDA products and services in Q4 2014, an increase of 13.8 percent compared to Q4 2013. The four-quarters moving average for the Americas increased 10.4 percent.

Revenue in Europe, the Middle East, and Africa (EMEA) was flat in Q4 2014 compared to Q4 2013 on revenues of $328.9 million. The EMEA four-quarters moving average increased 3.6 percent.

Fourth quarter 2014 revenue from Japan decreased 19.5 percent to $206.8 million compared to Q4 2013. The four-quarters moving average for Japan decreased 17.8 percent.

The Asia/Pacific (APAC) region revenue increased to $632.9 million in Q4 2014, an increase of 33.9 percent compared to the fourth quarter of 2013. The four-quarters moving average increased 18 percent.

The complete MSS report, available to the EDA Consortium members, contains additional detail for countries in the Asia/Pacific region.

About the MSS Report
The EDA Consortium Market Statistics Service reports EDA industry revenue data quarterly and is available to EDAC members. Both public and private companies contribute data to the report. Each quarterly report is published approximately three months after quarter close. MSS report data is segmented as follows: revenue type (product licenses and maintenance, services, and SIP), application (CAE, PCB/MCM Layout, and IC Physical Design & Verification), and region (the Americas, Europe Middle East and Africa, Japan, and Asia Pacific), with many subcategories of detail provided. The report also tracks total employment of the reporting companies.

About the EDA Consortium
The EDA Consortium is the international association of companies that provide design tools and services that enable engineers to create the world's electronic products used for communications, computer, space technology, medical, automotive, industrial equipment, and consumer electronics markets among others. For more information about the EDA Consortium, visit www.edac.org, or to subscribe to the Market Statistics Service, call 408-287-3322 or email Email Contact.

The information supplied by the EDA Consortium is believed to be accurate and reliable, but the EDA Consortium assumes no responsibility for any errors that may appear in this document. All trademarks and registered trademarks are the property of their respective owners.

Press Contacts:

Paul Cohen, EDA Consortium, 978-769-2106
Suzanne Graham, Mentor Graphics, 503-685-7789


To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/eda-consortium-reports-record-revenue-for-q4-2014-and-for-the-year-300063883.html

SOURCE EDA Consortium

EDA Consortium
Web: http://www.edac.org

Review Article Be the first to review this article
CST Webinar Series


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Sr. staff ASIC Design Engineer -2433 for Microchip at San Jose, CA
SENIOR ASIC Design Engineer for TiBit Communications at Petaluma, CA
Upcoming Events
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
2016 International Conference On Computer Aided Design at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
ICCAD 2016, Nov 7-10, 2016 at Doubletree Hotel in Austin, TX at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy