New XMC Modules Feature Xilinx® Kintex™-7 FPGA

Acromag's new XMC-7K family of user-configurable Kintex-7 FPGA modules are ideal for Aerospace and COTS applications that demand high-performance customized embedded systems

WIXOM, Mich., Feb. 25, 2015 — (PRNewswire) —  Acromag's new XMC-7K is a family of XMC mezzanine modules enhanced with Xilinx® Kintex™-7 FPGA for low-power consumptions and exceptional 128M x 64-bit DDR3 SDRAM processing performance. Reconfigurable Kintex-7 FPGA is possible via a direct download into the Flash configuration memory over the PCIe bus or the JTAG port. Eight-lane high-speed serial interface on rear P15 connector for PCI Express Gen 1/2 (standard), Serial RapidI/O, 10-Gigabit Ethernet, and Xilinx Aurora implementations are supported. Rear I/O provides 4 or 8-lane high-speed serial interface on the P16 XMC port. SelectI/O or LVDS pairs plus global clock pairs direct to FPGA via rear P4 or P16 port. The FPGA serves as a co-processor applying custom logic and algorithms to streams of remote sensor data. Typical applications include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing. Designed and manufactured in the USA, lead-free modules are available in a variety of configurations beginning at $4,400.

Acromag's new XMC-7K family of user-configurable Kintex-7 FPGA modules are ideal for Aerospace and COTS applications that demand high-performance customized embedded systems.

"Migration to a standard protocol running on a well-defined medium such as Gigabit Ethernet, Serial RapidI/O, or Aurora allows IP cores to be developed that can be easily supported for the long term," commented Joseph Primeau, Acromag's embedded sales and marketing director.

Build options include the choice of a Xilinx XC7K325T or XC7K410T FPGA device. Acromag's XMC-7K family offers highly efficient and dependable module. Options include plug-in I/O, dual SFP+ ports, or conduction-cooled for extended temperature. An engineering design kit provides user with basic information required to develop a custom FPGA program. Software support packages are available for VxWorks® 32-bit, Windows® DLL, and Linux™.

Acromag has designed and manufactured measurement and control products for more than 50 years. They are an international corporation with a world headquarters near Detroit, Michigan and a global network of sales representatives and distributors. Acromag offers a complete line of embedded I/O products including bus boards, mezzanine modules, embedded computers, wiring accessories, and software. Industries served include military, aerospace, manufacturing, transportation, utilities, and scientific research laboratories.

For more information about Acromag products, call Inside Sales at (248) 295-0310 or Marketing Communications at (248) 295-0866, FAX (248) 624-9234. E-mail Email Contact or write Acromag at 30765 S. Wixom Rd, Wixom, MI 48393-2417 USA.  The web site is www.acromag.com.

All trademarks are the property of their respective owners.

Photo:  http://photos.prnewswire.com/prnh/20150225/177768 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/new-xmc-modules-feature-xilinx-kintex-7-fpga-300041254.html

SOURCE Acromag

Contact:
Acromag
Sales - Inside Sales Department (e-mail: Email Contact Editorial - Karen Haldenwanger, Mktg. Mgr. ( Email Contact
Web: http://www.acromag.com




Review Article Be the first to review this article

ALDEC:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Reverie: All That Glitters is not Past
More Editorial  
Jobs
Technical Support Engineer for EDA Careers at Freemont, CA
Digital and FPGA Hardware Designer for Giga-tronics Incorporated at San Ramon, CA
Senior Physical Design Engineer for Ambiq Micro at Austin, TX
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
SoC Design Engineer for Intel at Santa Clara, CA
Technical Marketing Manager Valley for EDA Careers at San Jose, CA
Upcoming Events
European 3D Summit 2017 at 3, parvis Louis Néel 38054 Grenoble France - Jan 23 - 25, 2017
3D Printing Electronics Conference at High Tech Campus 1, 5656 Eindhoven Eindhoven Netherlands - Jan 24, 2017
DesignCon 2017 at Santa Clara Convention Center Santa Clara CA - Jan 31 - 2, 2017
Embedded Neural Network Summit at San Jose CA - Feb 1, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy