Complete USB Human Interface Design Platform

Digital Core Design, an IP Core provider and a System-on-Chip design house from Poland, introduced the USB HID Design Platform. It is complete and integrated solution which targets almost all aspects of USB based Human Interface Devices. Apart from that, DCD’s solution enhances Internet of Things (IoT) projects thanks to its software stack optimized with ultra-low power DP8051 8.bit CPU.

Bytom, Poland, 2nd of February, 2015. 

Highlights:

  • DUSB2 peripheral controller, designed to support 12 Mb/s "Full Speed" (FS) and 480 Mb/s "High Speed" (HS) serial data transmission rates
  • DP8051XP ultra high performance, speed optimized, fully customizable 8051 8-bit microcontroller with built-in DoCDTM debug IP core
  • Human Interface Devices software stack optimized for DP8051XP 8-bit CPU
  • FPGA board with ready to use, preprogrammed example HID application
  • HAD2 – DoCDTM Hardware Assisted Debugger board
  • DoCDTMDebug Software
  • DoCDTMdriver for Keil development software
  • DoCDTM driver for IAR development software 

Digital Core Design’s USB HID Design Platform is a complete and integrated solution createdto enhance USB based Human Interface Devices design experiences. Mouses, keyboards, tablets but also hundreds of other e-quipment is based on stable USB connection. So it’s not a secret that a true programmable embedded system-on-chip integrating configurable analog and digital peripheral functions, is one of the biggest challenges engineers ever faced. – Our Human Interface Devices Design Platform offers the highest level of testability, conformance and verification – explains Tomasz Krzyzak, DCD’s Vice President, Member of the Board of Directors. This specific SoC seems to be the leading combination of all crucial elements implemented in one IP Core.

The USB HID Design Platform supports UTMI Transceiver Macrocell Interface as well as low cost Full Speed Macrocells. It’s been stacked with the DP8051 DCD’s IP Core, which guarantees 100% software compatibleness with ’51 industry standard. The same engineers gets up to 256 bytes of internal (on chip) Data Memory, up to 64K bytes of internal (on chip) or external (off chip) Program Memory. Last but not least, along with up to 16M bytes of external (off chip) Data Memory, goes a programmable Program Memory Wait States for wide range of memories speed. 

More information http://dcd.pl/ipcore/93/hid-platform/ 

Information about Digital Core Design:

The company founded in 1999, since the beginning stands in the forefront of the IP Core market. High specialization and profound customer service enabled to introduce more than 70 different architectures. Among them is the world’s fastest 8051 IP Core, the DQ80251, which is more than 66 times faster than the standard solution. As an effect, over 300 hundred licensees have been sold to more than 500 companies worldwide. Among them are the biggest enterprises like e.g. Sony, Siemens, General Electric and Toyota. But a lot of DCD’s customers are small businesses, R&D laboratories or front/back end offices, which require exact solution tailored to their project needs. Rough estimations say that more than 270 000 000 devices around the globe have been based on Digital Core Design’s IP Cores. 




Review Article Be the first to review this article
Synopsys: Custom Compiler

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Diversity: Really, who cares
More Editorial  
Jobs
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Senior Methodology Automation Engineer for EDA Careers at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
DDR 3-4-5 Developer with VIP for EDA Careers at San Jose, CA
Proposal Support Coordinator for Keystone Aerial Surveys at Philadelphia, PA
Upcoming Events
11th International Conference on Verification and Evaluation of Computer and Communication Systems at 1455 DeMaisonneuve W. EV05.139 Montreal Quebec Canada - Aug 24 - 25, 2017
The Rise of Mechatronics at Dassault Systèmes San Diego 5005 Wateridge Vista Drive San Diego CA - Sep 12, 2017
The Rise of Mechatronics at Buca di Beppo - Pasadena 80 West Green Street Pasadena CA - Sep 13, 2017
S2C: FPGA Base prototyping- Download white paper



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy