Symtavision extends collaboration with Lauterbach to significantly improve tool integration with TRACE32®

Hoehenkirchen and Braunschweig, Germany – November 25, 2014.  Symtavision, the global leader in timing analysis solutions for planning, optimizing and verifying embedded real-time systems, have extended their collaboration with Lauterbach. A significantly improved integration between SymTA/S and TraceAnalyzer timing design tools and Lauterbach’s TRACE32® suite of modular microprocessor development tools has been announced. The improved integration will better ensure the safety and reliability of automotive real-time software at the same time as speeding development and reducing costs.

The existing workflow, which enables real-time traces from TRACE32 to be imported and analyzed using Symtavision’s SymTA/S and TraceAnalyzer timing design and analysis tools, has been significantly improved to facilitate better support of rich traces with wait and release behavior, the import of traces with runnable activity within tasks and the ability to import and analyze functional-level traces generated by TRACE32.

With the Symtavision / Lauterbach joint workflow, code for automotive ECUs is imported into TRACE32 from any third party ECU configuration tool for target debugging, emulation and software validation. Trace data from ECU measurements or hardware independent simulations is then passed to TraceAnalyzer to visualize and analyze timing traces and validate ECU scheduling. The resulting timing models can be processed further in SymTA/S to perform worst-case and statistical timing analysis, as well as to virtually change the scheduling and explore / optimize the overall software architecture. The optimized configuration is then passed back to TRACE32 via the third party ECU configuration tool and uploaded to the target, completing the round-trip workflow.

Commenting on the extended collaboration between Symtavision and Lauterbach and the improved tool integration, Dr. Kai Richter, CTO of Symtavision, said: “We have seen a lot of interest from companies wishing to take advantage of the integration of SymTA/S and TraceAnalyzer with TRACE32 in order to ensure the real-time safety and reliability of software at the same time as speeding up development and reducing cost. The new features and functionality afforded by the extended integration greatly enhance their ability to achieve these objectives on an ongoing basis both in relation to current software architectures and potential future software extensions.”

“We are pleased to see TraceAnalyzer working together with TRACE32 is such a professional way,” said Rudi Dienstbeck from Lauterbach. “This integration extends the capabilities of our real-time tracing tools to a much higher level. I'm excited to watch how TraceAnalyzer uses the real-time data captured by TRACE32 to evaluate the scheduling and run-times of the actual ECU, and perform a comprehensive requirement analysis.”

About Symtavision
Symtavision® provides market-leading tools and associated consulting/engineering services for system-level timing design and timing verification – from early-phase estimation to final verification. Symtavision’s tools are used extensively in automotive electronics with support provided for all industry standards as well as a variety of other industry sectors including the automation, multimedia, telecommunications and transportation markets. Symtavision is headquartered in Braunschweig (Germany) with subsidiary offices in Munich (Germany), Cologne (Germany) and Troy (Michigan, USA), and is supported by a global network of distributors. Symtavision is an AUTOSAR development member and also a founding member of the Real-Time Experts Alliance. For more information visit:

About Lauterbach
Lauterbach is the world’s leading manufacturer of complete, modular microprocessor development tools with 35 years’ experience in the field of embedded designs and has supported debugging and tracing of multicore chips for more than 10 years. It is an international, well-established company with blue chip customers in every corner of the globe and has a close working relationship with all semiconductor manufacturers. Besides the headquarters in Hoehenkirchen, Germany, the company has its own branch offices in the United Kingdom, Italy, France, Tunisia, on the East and West coasts of the United States, Japan and China. Highly qualified sales and support engineers are also available in many other countries. For more information visit



Read the complete story ...

Review Article Be the first to review this article


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
2016 International Conference On Computer Aided Design at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
ICCAD 2016, Nov 7-10, 2016 at Doubletree Hotel in Austin, TX at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy