mCube Unveils World’s Smallest eCompass and iGyro Sensors Featuring Industry’s Lowest Power Consumption

New Products Boast 50 Percent Reduction in Size Compared to Previous Generation

SAN JOSE, Calif. — (BUSINESS WIRE) — November 6, 2014 — Expanding its portfolio of the world’s smallest MEMS motion sensors, mCube today announced the availability of its third generation electronic compass (eCompass) and second generation iGyro™ motion sensors. Ideally suited for wearables, gaming devices, tablets and smart phones, the new MC6470 eCompass and MC7030 iGyro inertial motion sensors are more than 50 percent smaller than previous generations, while delivering the industry’s best performance and lowest power consumption.

“With more than 70 million accelerometers shipped to date, mCube is committed to providing leading-edge technology solutions to the MEMS motion sensor market,” said Ben Lee, president and CEO, mCube, Inc. “With these two new products, we now offer the world’s smallest, lowest power consumption eCompass and iGyro sensors, enabling our customers to build smaller and more efficient products, with better performance than previously possible.”

About the MC6470 and MC7030 Sensors

The MC6470 and MC7030 solutions are sampling today in an industry-leading 2x2x0.95mm packaging, 50 percent smaller than previous mCube generations. The new MC6470 eCompass solution combines a high precision magnetic sensor with mCube’s third generation single-chip MEMS accelerometer into a 6DoF (6 Degrees of Freedom) eCompass.

The MC7030 iGyro, combining a 9DoF (9 Degrees of Freedom) accelerometer, magnetometer and rotational sensor solution, features the industry’s first software-based gyroscope optimized for Android™ smartphones and tablets. The product enables “virtual” gyroscope functionality on all mobile devices, delivering immersive, 9DoF motion gaming and augmented reality experiences to phone and tablet users. At the same time, the solution cuts power, cost and board space in half, compared to hardware-based discrete solutions found in all high-end phones today.

In addition, with the introduction of the MC6470 and MC7030, mCube is now able to provide its customers the convenience of footprint compatibility for 3DoF, 6DoF and 9DoF sensors in a 2x2mm package. These two new sensors, together with the MC34xx family of accelerometers, allow manufacturers the flexibility to provide three tiers of products with only a single PCB design, reducing inventory management efforts.

The new mCube eCompass and iGyro products are optimized for applications requiring high precision directional sensing, including map orientation, virtual reality data overlay, enhanced navigation with dead reckoning assistance, and hardware gyroscope replacement. Both the MC6470 and MC7030 provide standard accelerometer and magnetometer features, such as a motion enabled user interface, gesture recognition and gaming control. Together with mCube’s eMotion™ software, these products ease the integration of compass and rotational sensing functionality into the end product, providing tilt-compensated heading calculations, hard- and soft-iron calibration, and World Magnetic Model (WMM) compensation.

Small Size, Low Power Operation

The MC6470 and MC7030 solutions are ideal for the tablet, gaming and smartphone markets. In addition, due to their industry-leading small size, these devices are expected to be popular in the burgeoning next generation wearables market, where critical design requirements include small size and low power consumption. While in the past, designers had to choose between prolonged battery life or maintaining features and small size, the MC6470 and MC7030 maintains excellent battery life in an industry leading small package.

To achieve the world’s smallest MEMS design, the new eCompass and iGyro sensors leverage mCube’s proven monolithic single-chip MEMS design approach. This allows mCube to deliver leading edge, very small, single-chip MEMS+ASIC devices smaller than a grain of sand, consuming low power, featuring very high performance, all while remaining cost effective. These advancements make it possible to place one or more motion sensors onto nearly any object or device that moves. In some cases, the single-chip MEMS motion sensor silicon can be attached directly onto a printed circuit board without requiring chip packaging, saving real estate and reducing height to enable thinner and smaller system designs.


The MC6470 and MC7030 sensors are sampling to key customers today with volume production planned for Q2 2015.

Supporting Resources:

About mCube

mCube makes the smallest motion sensors in the world. As a technology leader, mCube aspires to be the enabler for the Internet of Moving Things by putting a MEMS motion sensor on anything that moves, improving the way consumers live and interact with technology. mCube is backed by leading investors and has already shipped over 70M units. For more information, visit . Follow mCube on Twitter @mcubemems.

1 | 2  Next Page »

Review Article Be the first to review this article

True Circuits:

Featured Video
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
SEMICON Europe at Grenoble France - Oct 25 - 27, 2016
ARM TechCon 2016 at Santa Clara Convention Center Santa Clara CA - Oct 25 - 27, 2016
Call For Proposals Now Open! at Santa Clara Convention Center, Santa Clara, CA California CA - Oct 25 - 27, 2016
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
DownStream: Solutions for Post Processing PCB Designs
Verific: SystemVerilog & VHDL Parsers

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy