Mentor Graphics Announces Xpedition System Designer for Comprehensive Multi-board Systems Development

WILSONVILLE, Ore., Oct. 28, 2014 — (PRNewswire) — Mentor Graphics Corporation (NASDAQ: MENT), the market and technology leader in printed circuit board (PCB) design solutions, today announced its newest offering and key building block in the Xpedition® platform, the Xpedition Systems Designer product for multi-board systems connectivity. The Xpedition Systems Designer product captures the hardware description of multi-board systems, from logical system definition down to the individual PCBs, automating multi-level system design synchronization processes to ensure team collaboration with accuracy and faster design productivity.

Mentor Graphics logo.

Current systems design processes for advanced electronics are fraught with multiple, disconnected tools used for system definition, with no standard methodology to synchronize and transfer design data between design disciplines and abstraction levels. This results in incorrect electrical connections, mechanical interference, and the high costs of manual synchronization. The Xpedition Systems Designer product resolves this problem as the industry's only single, integrated, and automated methodology that captures complete logic system definitions. The system may consist of multiple boards, cables and other system elements, such as backplane, cable assemblies, sensors and actuators. This solution enables consistency and completeness of the multi-board system description.

"Systems design involves collaboration across disciplines, and is critical to modern product development. Traditional design practices isolate systems capture from the rest of the process, lowering team productivity, stifling innovation, and increasing product cost," stated John MacKrell, vice president, Systems Engineering Knowledge Council lead of CIMdata. "Mentor Graphics' new systems design technology enables engineering teams to capture system designs, while collaborating effectively with all those involved in the design and implementation process to optimize the end product."

The Industry's Only "Common Cockpit" for System-wide Design Connectivity
The Xpedition Systems Designer product replaces time- and resource-consuming manual processes and the redundant re-entry of data with automatic synchronization of design changes across multiple levels and disciplines. This unique design "cockpit" enables system-wide partitioning of logical system blocks into individual PCBs. The environment fully supports concurrent design, enabling team members to simultaneously engineer and collaborate on different components of the system.

"Our new Xpedition platform delivers 'industry-first' technologies and our new Systems Designer product is a clear example," stated Henry Potts, vice president and general manager of Mentor Graphics Systems Design Division. "Xpedition Systems Designer was developed as the industry's best environment for design connectivity and team collaboration to deliver consistency of design integrity across disparate domains, tools and individuals."

Xpedition Systems Designer - Key Features and Benefits
The Xpedition Systems Designer product provides a broad range of capabilities to ensure accurate, concurrent, and reliable systems design connectivity via automated processes. Here is a list of added functionality to optimize systems design efficiency:

  • Single cockpit for logical system definition: System-level blocks and intra-board connectivity are defined within a common environment. System architectures created in Visio can by imported to accelerate system capture. Advanced synchronization work-in-progress design data enables multiple engineers to concurrently collaborate on the logical system level, as well as within the lower-level PCB projects.
  • Simplified system-wide partitioning: A system can be easily partitioned into multiple board projects and associated connectivity. Automated connectivity synchronizes changes across the system, enabling 'what-if' re-partitioning exercises to optimize the system for performance, size and cost.
  • Correct-by-design connector management: The effort to add, manipulate and update connectors is simplified with on-the-fly creation of parameterized connectors. Automated connector mating and pin pairing, as well as synchronization between PCB projects and system design data, eliminates connector errors throughout the design cycle.
  • Automated connectivity definition and verification: Definition of connections between system elements including connection order and wiring of multiple nets and wires is highly automated. Signals can be traced across the entire system to ensure that the connectivity is as specified.

The Xpedition Systems Designer product will be available in December 2014. For pricing information, contact a Mentor Graphics sales representative, and for additional product information, visit:

About Mentor Graphics
Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world's most successful electronics and semiconductor companies. Established in 1981, the company reported revenues over the last fiscal year in excess of $1.15 billion. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site:

(Mentor Graphics and Xpedition are registered trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)                                                             

For more information, please contact:
Larry Toda
Mentor Graphics
Email Contact

Logo -

To view the original version on PR Newswire, visit:

SOURCE Mentor Graphics Corporation

Mentor Graphics Corporation

Review Article Be the first to review this article


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
2016 International Conference On Computer Aided Design at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
ICCAD 2016, Nov 7-10, 2016 at Doubletree Hotel in Austin, TX at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy