ARM and TSMC Unveil Roadmap for 64-bit ARM-based Processors on 10FinFET Process Technology

HSINCHU, Taiwan & SANTA CLARA, Calif. — (BUSINESS WIRE) — October 2, 2014 — ARM® and TSMC today announced a new multi-year agreement that will deliver ARMv8-A processor IP optimized for TSMC 10FinFET process technology. Because of the success in scaling from 20SoC to 16FinFET, ARM and TSMC have decided to collaborate again for 10FinFET. This early pathfinding work will provide valuable learning to enable physical design IP and methodologies in support of customers to tape-out 10FinFET designs as early as Q4 2015.

“ARM and TSMC are industry leaders in our respective fields and collectively ensure the availability of leading-edge solutions for ARM-based SoCs through our deep and long-term collaboration,” said Pete Hutton, executive vice president and president, product groups, ARM. “Our mutual commitment to providing industry leading solutions drives us to work together early in the development cycle to optimize both the processor and the process node. This joint optimization enables ARM silicon partners to design, tape-out and bring their products to market faster.”

TSMC will be applying the learnings from prior generations of 20SoC and 16FinFET in the ARM ecosystem to offer performance and power improvements at 10FinFET that will be better than previous nodes. The ARM ecosystem can also take advantage of TSMC’s Open Innovation Platform® (OIP) which includes a set of ecosystem interfaces and collaborative components initiated and supported by TSMC.

“TSMC has continuously been the lead foundry to introduce advanced process technology for ARM-based SoCs,” said Dr. Cliff Hou, TSMC vice president of R&D. “Together with ARM, we proved out in silicon the high performance and low power of the big.LITTLE architecture as implemented in 16FinFET. Given the successful adoption of our previous collaborative efforts, it makes sense that we continue this fruitful partnership with ARM in future 64-bit cores and 10FinFET.”

The joint innovations from previous TSMC and ARM collaborations have enabled customers to accelerate their product development cycles and take advantage of leading-edge processes and IP. Recent benefits have included early access to ARM Artisan Physical IP and tape-outs of ARM Cortex®-A53 and Cortex-A57 processors on 16FinFET.

About ARM

ARM is at the heart of the world's most advanced digital products. Our technology enables the creation of new markets and transformation of industries and society. We design scalable, energy efficient-processors and related technologies to deliver the intelligence in applications ranging from sensors to servers, including smartphones, tablets, enterprise infrastructure and the Internet of Things.

Our innovative technology is licensed by ARM Partners who have shipped more than 50 billion System on Chip (SoCs) containing our intellectual property since the company began in 1990. Together with our Connected Community, we are breaking down barriers to innovation for developers, designers and engineers, ensuring a fast, reliable route to market for leading electronics companies. Learn more and join the conversation at http://community.arm.com.

About TSMC

TSMC is the world’s largest dedicated semiconductor foundry, providing the industry’s leading process technology and the foundry segment’s largest portfolio of process-proven libraries, IPs, design tools and reference flows. The Company’s owned capacity in 2014 is expected to be about 8 million (12-inch equivalent) wafers, including capacity from three advanced 12-inch GIGAFAB™ facilities, four eight-inch fabs, one six-inch fab, as well as TSMC’s wholly owned subsidiaries, WaferTech and TSMC China. TSMC is the first foundry to provide 28nm and 20nm production capabilities. TSMC’s corporate headquarters are in Hsinchu, Taiwan. For more information about TSMC please visit http://www.tsmc.com.

ARM, Cortex and Artisan are registered trademarks of ARM Limited (or its subsidiaries) in the EU and/or elsewhere. All rights reserved. All other brands or product names are the property of their respective holders. "ARM" refers to ARM Holdings plc (LSE: ARM and NASDAQ: ARMH) and members of its corporate group as constituted from time to time.

None of the information contained in this document may be adapted, republished, or reproduced in any form except with the prior written permission of the copyright holder, but links may be posted directly to this document from other websites, and the whole of the document correctly attributed and unmodified may be shared freely, unless the copyright holder at any time withdraws these permissions. This document is intended only to provide information to the reader about the relevant product(s) described or mentioned. All information is provided "as is" and without warranty. ARM makes no representation as to the product(s), and ARM shall not be liable for any loss or damage arising from the use of any information in this document or any error or omission in such information.



Contact:

ARM
Phil Hughes, +512-694-7382
Head of technical PR
Email Contact
or
TSMC
Elizabeth Sun, +886-3-5682085
Director of corporate communications
Email Contact




Review Article Be the first to review this article

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
Upcoming Events
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy