- New Full-Spectrum Capture™ receiver delivers up to 1.6 Gbps data rates at less than 75mW power dissipation per channel
- MaxLinear and Intel will demonstrate reference design at IBC 2014 featuring MxL268 and 32-channel Intel® Puma™ 6 DOCSIS 3.0 SoC
AMSTERDAM — (BUSINESS WIRE) — September 12, 2014 — MaxLinear, Inc. (NYSE: MXL), a leading provider of integrated radio frequency (RF) and mixed-signal integrated circuits for broadband communications applications, today announced the MxL268, a 32-channel, Full-Spectrum Capture™ (FSC™) receiver for next-generation DOCSIS 3.0 cable applications.
Delivering up to 1.6 Gbps throughput, the MxL268 is an ideal fit for cable operators looking to exceed speeds offered by their fiber-to-the-home (FTTH) competitors while maximizing investment in their existing infrastructure. With its FSC technology, the MxL268 captures the full 1 Gigahertz (GHz) cable spectrum, enabling cable operators to configure their systems flexibly to meet different consumer requirements for different combinations of data speeds and number of video channels.
The new device will be part of a platform demonstration with Intel at IBC 2014 in Amsterdam that combines the Intel Puma™6 32-channel DOCSIS 3.0 SoC with the MxL268 receiver in a platform bonding 32 DOCSIS 3.0 channels. The demonstration will be located in Intel’s booth in Hall 14, location L20. IBC 2014 runs from Sept. 12 – 16.
The MxL268 is pin compatible with MaxLinear’s MxL265 16-channel and MxL267 24-channel receivers, simplifying the effort of migrating designs to 32 channels. Manufacturers can reuse their investment in their Puma6 gateway designs by simply replacing the receiver with the MxL268.
The receiver is capable of simultaneously receiving any combination of 32 channels located arbitrarily inside the cable spectrum. Like other MaxLinear FSC cable receivers, the MxL268 features significantly reduced power consumption for gateways and STBs, minimized PCB footprint, reduced external RF bill-of-materials, and simplified design of customer platforms requiring multiple channel access.
“The MxL268 is designed for gateways and STBs where performance and functionality are critical. The FSC technology, integrated functionality and proven operation with Intel SoCs combine to make the MxL268 the best choice for 32-channel systems,” said Brian Sprague, MaxLinear’s Vice President and General Manager for Broadband and Consumer Products. “Low power, industry-leading integration and pin compatibility with our 16-channel and 24-channel devices are just some of the ways that we’re helping cable system OEMs get to market faster with superior 32-channel systems.”
Based on MaxLinear’s industry-leading, low-power 40 nm CMOS process technology, the MxL268 offers a monolithic digital cable front-end with integrated LNA and signal conditioning functions combined with a Full-Spectrum Capture receiver. In full 32-channel receive mode of operation, the MxL268 provides up to 1.6 Gbps downstream speeds and consumes less than 75mW per channel, eliminating the need for expensive heat removal components such as fans, heat shields and heat sinks inside customer equipment.
The MxL268 supports remote spectrum analyzer functions that report network health and performance parameters, which can be used by cable operators in managing and troubleshooting their networks. This innovative feature allows cable operators to avoid costly technician visits to customer homes by remotely monitoring and diagnosing potential problems with customer premises equipment.
The MxL268 is compliant with Energy Star and the European Code of Conduct for Digital TV Services and Broadband Equipment requirements for both standby and operating modes.
The device exceeds requirements for DOCSIS and video applications, including the stringent test scenarios under SCTE40 plant loading and impairment conditions. The device supports a serial interface to a DOCSIS 3.0 modem, and has an integrated single-channel tuner for low-power operation.
The MxL268 32-channel DOCSIS 3.0 digital cable receiver is available now in a standard 7 mm x 7 mm QFN package. Please contact MaxLinear for ordering information.
About MaxLinear, Inc.
MaxLinear, Inc. is a leading provider of radio-frequency and mixed-signal semiconductor solutions for broadband communications applications. MaxLinear is headquartered in Carlsbad, California. For more information, please visit www.maxlinear.com.
MxL, Full-Spectrum Capture, FSC and the MaxLinear logo are trademarks of MaxLinear, Inc. Other trademarks appearing herein are the property of their respective owners.
Cautionary Note About Forward-Looking Statements
This press release contains forward-looking statements within the
meaning of the Private Securities Litigation Reform Act of 1995.
Forward-looking statements include, among others, statements concerning
or implying future financial performance or trends and growth
opportunities affecting MaxLinear, in particular statements relating to
the introduction of the MxL268 FSC receiver. These forward-looking
statements involve known and unknown risks, uncertainties, and other
factors that may cause actual results to differ materially from any
future results expressed or implied by these forward-looking statements.
We cannot predict whether or to what extent we will realize revenues
from the introduction of the MxL268 FSC receiver. Forward-looking
statements are based on management’s current, preliminary expectations
and are subject to various risks and uncertainties, including (among
others) intense competition in our industry; the ability of our
customers to cancel or reduce orders; uncertainties concerning how end
user markets for our products will develop; our lack of long-term supply
contracts and dependence on limited sources of supply; potential
decreases in average selling prices for our products; currently pending
intellectual property litigation; and the potential for additional
intellectual property litigation, which is prevalent in our industry. In
addition to these risks and uncertainties, investors should review the
risks and uncertainties contained in MaxLinear’s filings with the United
States Securities and Exchange Commission, including risks and
uncertainties identified in our Quarterly Report on Form 10-Q for the
quarter ended June 30, 2014. All forward-looking statements are
qualified in their entirety by this cautionary statement. MaxLinear is
providing this information as of the date of this release and does not
undertake any obligation to update any forward-looking statements
contained in this release as a result of new information, future events,