IXYS Introduces New Non-Volatile Digital Programmable Capacitor

The NCD2100 is suitable for tunable RF stages and industrial wireless trimming

BEVERLY, Mass. — (BUSINESS WIRE) — September 9, 2014 — IXYS Integrated Circuits Division (ICD), Inc., a wholly owned subsidiary of IXYS Corporation (NASDAQ: IXYS), announced the availability of the NCD2100, non-volatile digital programmable capacitor. The NCD2100 is a dedicated electronic calibrator for capacitance critical circuits, a typical example of which is capacitive offset trimming of a crystal oscillator. Digitally controlled capacitance trimming information is communicated via a two-wire serial bus, with the calibration value stored in the internal, non-volatile memory.

The NCD2100 has a tuning ratio of 5.7:1 and a capacitance range of 6.6 – 37.55 pF in very small 63 femtofarad steps for shunt configuration. The device will retain the programmed capacitance value stored in its internal non-volatile memory, which becomes the ideal solution for trimming purposes. Restoring this memory to its initial factory default code is also possible so that future corrections are possible to manage system variations such as aging or re-tuning processes. Other features include very small size, minimum current draw, wide operating voltage range from 2.5V to 5.5V, and MSL 1 rating.

The NCD2100 is available in the 2mm x 2mm DFN package and also in the 2.8mm x 2.9mm TSOT package.

Typical applications include post-trim voltage-controlled oscillators (VCXOs), crystal oscillators, tunable RF Stages, RFID tags, industrial wireless control, filter banks and capacitive sensor trimming.

About IXYS ICD and IXYS Corporation

IXYS Integrated Circuits Division (ICD), a leader in the design and manufacture of solid state relays and high voltage integrated circuits, is a wholly owned subsidiary of IXYS Corporation. IXYS Corporation develops and markets primarily high performance power semiconductor devices that are used in controlling and converting electrical power efficiently in power systems for the telecommunication and internet infrastructure, motor drives, medical systems and transportation. IXYS also serves its markets with a combination of digital and analog integrated circuits, power systems and RF GaAs and GaN based products. Additional information about IXYS Integrated Circuits Division, Zilog and IXYS may be found at www.ixysic.com, www.zilog.com and www.ixys.com.

Safe Harbor Statement

Any statements contained in this press release that are not statements of historical fact, including the performance, rating, availability, reliability, operation and suitability of products for various applications, may be deemed to be forward-looking statements. There are a number of important factors that could cause the results of IXYS to differ materially from those indicated by these forward-looking statements, including, among others, risks detailed from time to time in the Company's SEC reports, including its Form 10-Q for the fiscal quarter ended June 30, 2014. The Company undertakes no obligation to publicly release the results of any revisions to these forward-looking statements.



Contact:

IXYS Corporation
Catherine Austin, 978-524-6823
Fax: 978-524-4900




Review Article Be the first to review this article
 True Circuits: IOT PLL

Aldec Simulator Evaluate Now

Featured Video
Jobs
Senior Formal FAE Location OPEN for EDA Careers at San Jose or Anywhere, CA
Applications Engineer for intersil at Palm Bay, FL
RF IC Design Engineering Manager for Intel at Santa Clara, CA
Design Verification Engineer for intersil at Morrisville, NC
Senior PIC Test Development Engineer for Infinera Corp at Sunnyvale, CA
Upcoming Events
Essentials of Electronic Technology: A Crash Course at Columbia MD - Jan 16 - 18, 2018
Essentials of Digital Technology at MD - Feb 13 - 14, 2018
IPC APEX EXPO 2018 at San Diego Convention Center San Diego CA - Feb 24 - 1, 2018
CST: Webinar series
TrueCircuits: IoTPLL



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise