MIPI Alliance Enhances its Battery Interface Specification with “Smart Battery” Capabilities for Mobile Devices

PISCATAWAY, N.J. — (BUSINESS WIRE) — August 6, 2014 — The MIPI® Alliance, an international organization that develops interface specifications for mobile and mobile-influenced industries, today announced updates to its Battery Interface Specification (BIF) for mobile devices. The new specification, MIPI BIF v1.1, makes it more practical and convenient for manufacturers to implement “smart” features in device batteries, facilitates the use of new high-performance batteries, and adds communications methods that improve battery safety and overall performance.

“The battery is a critical component in a mobile device and its deployment in a product has direct impact on the consumer experience and the mobile device ecosystem,” said Joel Huloux, chairman of the board of MIPI Alliance. “MIPI BIF v1.1 will give companies a set of functions they can use to develop innovative, service-differentiating battery functions while improving battery safety—all via this single interface solution.”

The MIPI BIF specification is a single-wire hardware and software interface for connecting a power management chip in a phone to a smart or low-cost rechargeable battery. It is the only mobile-to-battery communication interface specification in the industry, offering manufacturers a uniform solution to replace proprietary interfaces. It also provides the communications and intelligence capability needed to measure fundamental battery operational conditions, such as temperature, or to verify a battery’s authenticity. The adoption of MIPI BIF in the mobile industry has also enabled manufacturers to offer interoperable battery products, reduce chipset space and streamline design, implementation and testing of their components to accelerate product time-to-market while lowering costs.

The new release, v1.1, enhances the MIPI BIF specification with additional “smart battery” functions that can be applied in smartphones, tablets and mobile-influenced devices that use removable or embedded batteries. One of the specification’s most important new features is a fuel gauge interface that can monitor a battery’s charge and other conditions that characterize the health of the battery. The specification also introduces sophisticated charging enhancements: it supports the safe, fast charging of new, high-performance batteries and it also enables companies to develop their own battery charging parameters to ensure safe operation and maximize battery life. Additionally, the v1.1 specification makes the interface more robust by defining device recovery behavior from unexpected battery contact breaks or other communication errors.

“Battery chemistries are constantly evolving to provide higher power densities, faster charging and other benefits to consumers yet these more advanced features also create new battery control and management requirements,” said Wolfgang Furtner, vice chair of the MIPI Alliance Battery Working Group. “Manufacturers need a smart battery interface to take advantage of these capabilities and with MIPI BIF v1.1, they now have the opportunity to enable these features and extend the benefits of smart batteries to more products.”

MIPI BIF is already supported by multiple mobile chipset manufacturers and battery IC manufacturers. It has been successfully adopted for use in smart phones that are commercially available on the market for consumers. Companies that are using the specification include Infineon, Microsoft, Mitsumi, Sharp, STMicroelectronics, and UNH-IOL, among others.

The MIPI Alliance is highlighting MIPI BIF v1.1 at the Battery Power conference this week, on Aug. 6-7, 2014, in Denver, Colo. The MIPI Alliance is a supporting organization for the conference. During the event, Giovanni Carta of Infineon, a MIPI Alliance member, will deliver a presentation introducing the BIF to the industry on behalf of the MIPI Alliance. His presentation will take place on Aug. 7 at 10:50 a.m. MT as part of the event’s Consumer Battery Track. He will be supported by Robert Rozario (also of Infineon and a speaker on Aug. 6). For more information about the Battery Power conference, please visit http://www.batterypoweronline.com/conferences/.

For more information about MIPI BIF v1.1, please visit http://bit.ly/MIPI-BatteryInterface.

About MIPI Alliance

MIPI Alliance (MIPI) develops interface specifications for mobile and mobile-influenced industries. Founded in 2003, the organization has more than 260 member companies worldwide, more than 15 active working groups, and has delivered more than 45 specifications within the mobile ecosystem in the last decade. Members of the organization include handset manufacturers, device OEMs, software providers, semiconductor companies, application processor developers, IP tool providers, test and test equipment companies, as well as camera, tablet and laptop manufacturers. For more information, please visit  www.mipi.org.

MIPI® is a registered trademark owned by the MIPI Alliance.


Interprose for MIPI Alliance
Minu Seshasayee, 425-868-3829
Email Contact

Review Article Be the first to review this article
CST: Webinar Feb 16, 2017


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Synopsys: Is 40 the new 20?
More Editorial  
Technical Support Engineer for EDA Careers at Freemont, CA
Technical Marketing Manager Valley for EDA Careers at San Jose, CA
SoC Design Engineer for Intel at Santa Clara, CA
Senior Physical Design Engineer for Ambiq Micro at Austin, TX
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
Upcoming Events
3D Printing Electronics Conference at High Tech Campus 1, 5656 Eindhoven Eindhoven Netherlands - Jan 24, 2017
DesignCon 2017 at Santa Clara Convention Center Santa Clara CA - Jan 31 - 2, 2017
Embedded Neural Network Summit at San Jose CA - Feb 1, 2017
International Solid-State Circuits Conference (ISSCC) at San Francisco CA - Feb 5 - 9, 2017
CST: Webinars Begin on February 9

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy