ProTek Devices' Intros New Power Bus Voltage Suppressor Component

TEMPE, Ariz., April 14, 2014 — (PRNewswire) —  ProTek Devices has introduced a new voltage suppressor component to provide power bus circuit protection using features such as a rated stand-off of 78 volts, bidirectional configuration, and a package weighing just 9.8 grams. ProTek Devices' 2700SM78CAN also provides 2,250 kilowatts of peak pulse power per line (typical = 8/20 microamps).

In addition, the new component provides a peak pulse current of 15 kiloamperes (typical = 8/20 microamps) and other features suited for power bus voltage suppression. They include a minimum breakdown voltage of 86 volts, a maximum clamping voltage of 150 volts, and a maximum leakage current of 10 microamperes. Leakage current is rated at 10 volts.

The 2700SM78CAN is RoHS complaint (exemption #7A - high power device) and is provided with lead-free silver plating. Its co-planarity is < 0.10mm. The flammability rating is UL 94V-0. Storage temperature is -55 to +150 degrees Celsius and operating temperatures are -40 to +125 degrees Celsius.

Pricing and Availability
ProTek Devices' 2700SM78CAN is now available in mass quantities. Pricing starts at around $24.79 per part in minimum quantities of 100 units. It's available in 32mm tape and reel, per EIA standard 481, which provides 250 voltage suppressor components per 32mm tape. A data sheet for the series can be download at http://www.protekdevices.com/Assets/Documents/Datasheets/2700sm78can.pdf.  

About ProTek Devices
In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor arrays (TVS arrays), avalanche breakdown diodes, steering diode TVS arrays, PPTC devices, and electronics SMD chip fuses. These components deliver circuit protection in various electronic systems against lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference / radio frequency interference (EMI / RFI). ProTek Devices also offers high performance interface and linear products. They include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control ICs; RF and related high frequency products. The company maintains its headquarters in Tempe, Ariz. More information is available at http://www.protekdevices.com.

Note: Whether noted or not, references to certain words may be trademarks or registered trademarks of their respective owners.

COMPANY CONTACT:

MEDIA CONTACT:

VP Pai

Rafael Larin

ProTek Devices

Emissary Communications

1.602. 431.8101

1.818.541.9595

marketing@protekdevices.com

rafael@emissarypr.com

www.protekdevices.com

www.emissarypr.com

SOURCE ProTek Devices

Contact:
ProTek Devices
Web: http://www.protekdevices.com




Review Article Be the first to review this article

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
ICScape: At the Junction of Math & CS, EDA & IP
Peggy AycinenaIP Showcase
by Peggy Aycinena
Arm Momentum: Segars embraces exciting times
More Editorial  
Jobs
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, Germany
REVISED***Director Product Line RF/IC for EDA Careers at San Jose, CA
Senior SW Developer for EDA Careers at San Jose, CA
Upcoming Events
“Empowering Leadership with WIT and WISDOM” at SEMI 673 South Milpitas Blvd. Milpitas CA - Nov 28, 2017
Artificial Intelligence and Convolution Neural Networks Discussion at San Jose State University Student Union Theater San Jose CA - Dec 4, 2017
Silicon Valley's Only Comprehensive Embedded Systems Conference at San Jose Convention Center 150 W. San Carlos St. San Jose CA - Dec 5 - 7, 2017
Oski Technology’s Decoding Formal Club Meeting at The Conference Center San Jose CA - Dec 7, 2017
DownStream: Solutions for Post Processing PCB Designs
TrueCircuits: IoTPLL



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise