Recognized as IPC-Trusted Source and QML-Listed

BANNOCKBURN, Ill., USA, March 20, 2014 — IPC’s Validation Services Program has awarded the first IPC J-STD-001/IPC-A-610 Qualified Manufacturers Listing (QML) to IEC Electronics Corporation’s Newark, New York and Albuquerque, New Mexico, facilities. In addition, IEC Electronics’ testing laboratory, Dynamic Research and Testing Laboratories (DRTL) in Albuquerque has been certified as an IPC-approved Validation Services Test Laboratory.

IPC President and CEO John Mitchell will present certificates to IEC Electronics during the Opening Keynote Session at IPC APEX EXPO® on Tuesday, March 25, 2014, at Mandalay Bay Convention Center in Las Vegas.

“IEC Electronics is honored to be the first company certified under the IPC QML Validation Program. This certification recognizes consistency in our global footprint, and identifies the level of our product quality for our customers throughout our supply chain. This certification serves as a testament to IEC’s excellence in electronics assembly, and builds critical awareness of the level of quality needed in the EMS community,” said Mark Northrup, vice president of technical operations and strategy at IEC Electronics Corp.

IEC Electronics’ Newark and Albuquerque facilities were the first sites to undergo IPC’s Validation Services assessment/audit which is based on IPC J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies and IPC-A-610, Acceptability of Electronic Assemblies Class 3 requirements. The company will be listed as an IPC-trusted source on IPC’s online QML.

IEC Electronics is among the first companies to participate in IPC’s new Validations Services QPL/QML Program which was launched in 2013. Developed to promote supply chain verification, the program provides auditing and certification of electronics companies’ products and processes which conform to IPC standards.

“Different from other audit programs, IPC’s Validation Services Program uniquely provides technical and in-depth assessments of products and processes in accordance with IPC standards,” said Randy Cherry, IPC director of Validation Services. “We are pleased to recognize IEC Electronics as the first member of IPC’s network of trusted QML suppliers.”

About IPC

IPC ( is a global industry association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 3,400 member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $2 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Washington, D.C.; Stockholm, Sweden; Moscow, Russia; Bangalore, India; Bangkok, Thailand; and Shanghai, Shenzhen, Chengdu, Suzhou and Beijing, China.

About IEC Electronics         

IEC Electronics Corporation ( is a premier provider of electronic manufacturing services (“EMS”) to advanced technology companies primarily in the military and aerospace, medical, industrial and communications sectors.  The Company specializes in the custom manufacture of high reliability, complex circuit cards, system level assemblies, a wide array of custom cable and wire harness assemblies, precision sheet metal products, and advanced research and testing services. As a full service EMS provider, IEC is ISO 9001:2008, AS9100 and ISO13485 certified, Nadcap accredited and an approved NSA supplier under the COMSEC standard. Dynamic Research and Testing Laboratories (DRTL), the Company’s newest business unit, is an ISO 17025 accredited laboratory specializing in component risk mitigation and advanced failure analysis. IEC Electronics is headquartered in Newark, NY (outside of Rochester) and also has operations in Rochester, NY, Albuquerque, NM and Bell Gardens, CA. 


Randy Cherry
+1 847-597-2806

Anna Garrido,
Director of Marketing and Communications
+1 847-597-2804 or
Email Contact

Review Article Be the first to review this article

Featured Video
Applications Engineer for intersil at Palm Bay, Florida
Senior Electrical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Principle Electronic Design Engr for Cypress Semiconductor at San Jose, California
Design Verification Engineer for intersil at Morrisville, North Carolina
Upcoming Events
Decoding Formal Club Meeting Featuring Formal Talks by ArterisIP and Cisco at 2099 Gateway Place, Suite 560 San Jose CA - Mar 20, 2018
NVIDIA’s GPU Technology Conference (GTC) at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - Mar 26 - 29, 2018
ESC Conference Boston at boston MA - Apr 18 - 19, 2018

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise