Agilent Technologies Introduces Physics-Based VCSEL Model to Solve Challenges in Designing Rack-to-Rack Opto Links

SANTA CLARA, Calif. — (BUSINESS WIRE) — October 23, 2013 — Agilent Technologies Inc. (NYSE: A) today introduced a physics-based model for its opto model library that quickly and accurately solves the challenges posed by signal distortion in vertical cavity surface emitting lasers (VCSELs) used in rack-to-rack opto links. The new VCSEL model, available in the Advanced Design System 2013 Transient Convolution Element and SystemVue 2013 AMI Modeling Kit, is used both for modeling optoelectronic components and designing them into equipment.

Before the multigigabit era, rack-to-rack digital signals propagated tens or even hundreds of meters across CAT-5 twisted pair or co-axial copper cables with little distortion. However, at today’s speeds, rising and falling edges degrade after travelling only a few meters. Laser technologies like VCSELs have pushed down the cost of optoelectronics to the point where optical fiber communication is now replacing traditional copper cabling for spans over about 10 meters in the multigigabit regime.

Up to now, simulation tools used to design these nonlinear devices required engineers to learn a whole new optical paradigm. With the new VCSEL model, however, Agilent is leveraging a technique that high-speed digital engineers are already familiar with—the Input/Output Buffer Information Specification (IBIS) AMI flow. Senior Agilent engineers contributed this innovative model to document BIRD-156 of the IBIS Open Forum. BIRD-156 extends the AMI flow to allow both electrical and optical repeater links to be modeled and was incorporated in the recently ratified IBIS version 6.0. Agilent co-authors will present a paper, “Modeling, Extraction and Verification of VCSEL Model for Optical IBIS AMI,” at DesignCon 2014, to be held in January in Santa Clara.

With the VCSEL model, SystemVue 2013 now offers model builders, such as optoelectronic component vendors, a tool that supports the evolution of IBIS and can build rack-to-rack opto link models. The models run in ADS, the tool that opto component consumers (data center and telecoms equipment manufacturers, for example) use to design these subsystems into their larger systems. SystemVue 2013 also now features an enhanced model for the clock/data recovery circuitry found in both optical and electrical retimers.

“With our previous opto model library release we added a simpler class of VCSEL model with frequency-independent behavior,” said Colin Warwick, product manager for High-Speed Digital Design at Agilent EEsof EDA. “With this release, we’re adding not only a physics-based, frequency-dependent model that uses rate equation techniques, but also a tool to fit the rate equation parameters to measured data, ensuring an accurate model.”

U.S. Pricing and Availability

Agilent’s Advanced Design System 2013 and SystemVue 2013 are available now. Pricing depends on the exact configuration. An image is available at

Agilent offers a wide selection of high-speed digital solutions including essential tools to pinpoint problems, optimize devices and deliver results for design and simulation. Visit the Agilent YouTube network at to see the latest products and applications videos in electronic design and measurement.

About Agilent EEsof EDA Software

Agilent EEsof EDA is the leading supplier of electronic design automation software for microwave, RF, high-frequency, high-speed digital, RF system, electronic system level, circuit, 3-D electromagnetic, physical design and device-modeling applications. More information is available at

About Agilent Technologies

Agilent Technologies Inc. (NYSE: A) is the world’s premier measurement company and a technology leader in chemical analysis, life sciences, diagnostics, electronics and communications. The company’s 20,500 employees serve customers in more than 100 countries. Agilent had revenues of $6.9 billion in fiscal 2012. Information about Agilent is available at

NOTE TO EDITORS: Further technology, corporate citizenship and executive news is available at


Agilent Technologies Inc.
Janet Smith, +1 970-679-5397 (Americas)
Email Contact
Twitter: @JSmithAgilent
Sarah Calnan, +44 (118) 927 5101 (Europe)
Email Contact
Iris Ng, +852 31977979 (Asia)
Email Contact

Review Article Be the first to review this article
CST Webinar Series


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
2016 International Conference On Computer Aided Design at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
ICCAD 2016, Nov 7-10, 2016 at Doubletree Hotel in Austin, TX at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy