X-ES Announces Freescale(TM) QorIQ(TM) T4240 or T4160-Based 6U VPX Module

MIDDLETON, WI -- (Marketwired) -- Jul 10, 2013 -- Extreme Engineering Solutions, Inc. (X-ES) introduces the XCalibur1840, a 6U OpenVPX module featuring the Freescale™ QorIQ™ T4240 or T4160 communications processor. Freescale's Power Architecture e6500-based T4240 and T4160 processors combine multiple 1.8 GHz dual-threaded cores, large caches, and high-performance networking capabilities with the next-generation AltiVec single-instruction multiple-data (SIMD) engine to provide high-performance processing for both control and data plane tasks from a single system on a chip (SoC). Freescale's significantly improved next-generation AltiVec engine delivers DSP-level floating-point performance with 172 GFLOPS of vector processing capability, more than seven times the performance of its previous generation, while maintaining compatibility with an already extensive inventory of AltiVec software libraries.

The XCalibur1840 can be built to support either the T4240 or T4160 processor. When configured for the T4240, the XCalibur1840 maximizes total processing performance with twelve dual-threaded physical cores or up to twenty-four virtual cores. The T4160 provides a lower-power solution with eight dual-threaded physical cores or up to sixteen virtual cores, ideal for platforms with more stringent Size Weight and Power (SWaP) restrictions.

The XCalibur1840 provides a number of high-performance I/O interfaces, including sixteen lanes of Gen 2 PCI Express, four Gigabit Ethernet Interfaces, and front panel or backplane 10 Gigabit Ethernet ports. The versatile XCalibur1840 supports two XMC or PMC modules for additional I/O and processing flexibility, and it includes up to 24 GB of DDR3 ECC SDRAM across three channels. The XCalibur1840 is available in either conduction-cooled or air-cooled versions and supports 0.8" pitch or 1.0" pitch 2 Level Maintenance (2LM) configurations.

Contact X-ES today to start using Freescale's high performance QorIQ T Series processors for your applications.

About X-ES -- Extreme Engineering Solutions, Inc. (X-ES), a 100% U.S.A.-based company, designs and builds single board computers, I/O boards, power supplies, backplanes, chassis, and system-level solutions for embedded computing customers. X-ES offers cutting-edge performance and flexibility in design, plus an unparalleled level of customer support and service. For further information on X-ES products or services, please visit our website: www.xes-inc.com or call (608) 833-1155.

Data Sheet: http://www.xes-inc.com/assets/products/files/XCalibur1840-DS.pdf
Press Photo: http://www.xes-inc.com/assets/photos/content/114111_XCalibur1840.jpg

Add to Digg Bookmark with del.icio.us Add to Newsvine





Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs

Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
DVCon Europe 2017: Munich and So much more
More Editorial  
Jobs
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Upcoming Events
25th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC 2017) at Yas Viceroy Abu Dhabi Yas Marina Circuit, Yas Island Abu Dhabi United Arab Emirates - Oct 23 - 25, 2017
ARM TechCon 2017 at Santa Clara Convention Center Santa Clara CA - Oct 24 - 26, 2017
MIPI DevCon Bangalore 2017 at The Leela Palace Bengaluru India - Oct 27, 2017
MIPI DevCon Hsinchu City 2017 at Sheraton Hsinchu Hotel Taiwan - Oct 31, 2017
CST: Webinar series
Verific: SystemVerilog & VHDL Parsers
TrueCircuits: IoTPLL



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise