Semtech Adds to its Transceiver Platform with the SX1235 Which Provides ETSI Category 1 Compliance

New Transceiver is Ideal for Social Alarms and Healthcare Monitoring; Meets ETSI Category 1 Standard with 6 dB Margin

CAMARILLO, Calif. -- 10 January, 2013 -- (BUSINESS WIRE) -- Semtech Corporation (Nasdaq: SMTC), a leading supplier of analog and mixed-signal semiconductors, today expanded its RFIC transceiver platform with the new SX1235, a fully integrated, high-performance, low current sub-GHz RF transceiver that provides ETSI category 1 compliance with 6 dB regulatory margin.

ETSI category 1 compliance is the highest transceiver rating for European regulations and is required for safety-critical wireless applications such as social alarms and healthcare monitoring. The SX1235 expands the target applications for Semtech's wireless platform and provides an affordable high-performance radio IC solution to monitor, serve and increase the safety of a rising aging population.

Previous category 1 solutions have only been realizable with large and expensive discrete solutions which are difficult to design and offer little flexibility, thus limiting the overall deployment of products designed to provide safety to the elderly and workers in hazardous conditions. An integrated solution with the SX1235 reduces the development time and cost with flexibility to tailor to multiple products leading to the expansion of products to serve this important market segment.

With an industry-leading 9.3 mA receive mode current consumption, the SX1235 is ideal for category 1 applications seeking the lowest consumption possible for maximum battery lifetime while giving the highest margin to the regulatory limits. Current consumption or power efficiency in both transmit and receive modes, determines the capacity of primary or secondary back-up battery cells used in category 1 products which have a significant influence on the cost of these systems.

"The SX1235's high performance and low current consumption confirm Semtech's position as a world leader in the field of low power transceivers with the most robust performance," said Hardy Schmidbauer, Semtech's Director of Wireless ISM Products. "With half the receiver consumption of competing devices, this technology allows reliable category 1 compliance in battery powered applications enabling miniaturized low power category 1 devices that were previously unattainable."

Key Features of the SX1235

  • +20 dBm maximum output power
  • -123 dBm sensitivity at 1.2 kbps
  • Low current consumption
    • 9.3 mA RX current
    • 100 nA sleep current
    • 28 mA TX current at +13 dBm
  • -12 dBm IIP3
  • 6 dB adjacent channel selectivity margin for category 1 compliance
  • 6 dB margin for 2 MHz category 1 blocking specification with specified SAW filter
  • 10 dB margin for 10 MHz category 1 blocking specification with specified SAW filter
  • 1.8 to 3.7 V supply range
  • Ultra-fast frequency hopping

Applications:

Home and Building Automation: Building Alarms Systems, Wireless Alarm

Medical: Medical Equipment, Healthcare Monitoring Systems

Pricing and Availability

The SX1235 (order code: SX1235IMLTRT) is available immediately in production quantities and is priced at $1.95 each in 10,000-piece lots. Semtech offers comprehensive design assistance, including field- and factory-based support. Data sheets, volume pricing, and delivery quotes, as well as evaluation kits and samples are available at www.semtech.com/info.

About Semtech

Semtech Corporation is a leading supplier of analog and mixed-signal semiconductors for high-end consumer, computing, communications and industrial equipment. Products are designed to benefit the engineering community as well as the global community. The company is dedicated to reducing the impact it, and its products, have on the environment. Internal green programs seek to reduce waste through material and manufacturing control, use of green technology and designing for resource reduction. Publicly traded since 1967, Semtech is listed on the NASDAQ Global Select Market under the symbol SMTC. For more information, visit http://www.semtech.com.


Contact:

Pauline Cadena
Semtech Corporation
Tel.: 805-389-2755
Email Contact




Review Article Be the first to review this article
CST: Webinar September 14, 2017

Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Blue Pearl: Best kept Secret in EDA
More Editorial  
Jobs
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
FPGA Engineer for Teradyne Inc at San Jose, CA
Upcoming Events
CODES+ISSS 2017, Oct 15-20, 2017, Lotte Hotel, Seoul, South Korea at Lotte Hotel Seoul Korea (North) - Oct 15 - 20, 2017
DVCon 2017 Europe, Oct 16 - 17, 2017, Munich, Germany at Holiday Inn Munich City Centre Munich Germany - Oct 16 - 17, 2017
11th International Symposium on Networks-on-Chip (NOCS 2017) at Seoul Korea (South) - Oct 19 - 20, 2017
TrueCircuits: UltraPLL



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise