Qualchip Passed the Acceptance Inspection of CEC Specialist Group under Teledyne LeCroy's Test Platform's Verification

December 28,2012 -- WuXi,China -- The USB3.0/2.0 Combo PHY IP Core Self-developed by Qualchip Technologies, Inc.(Qualchip) passed the Acceptance of CEC Specialist Group by Teledyne LeCroy's Test Platform's Verification, the performance of which were totally satisfied with USB 3.0 Physical Test Specification and USB IF(USB Implementers Forum) compliance test requirements. Moreover, most parameters were well better than the requirements of the specifications. Currently, Qualchip is porting the Combo PHY to SMIC 40LL process, which will be taped-out in January, 2013.                                                                                                                           

"The test and verification of our USB 3.0 PHY used Teledyne LeCroy's USB 3.0 total test solution based on SDA825Zi-A+PeRT3+QualiPHY. The solution combined the oscilloscope、Protocol Enabled Receiver and Transmitter Tolerance Tester with the automatic Qualify compliance software, which can complete all the items test the USB 3.0 specification requires such as physical parameters、jitter tolerance", said Mr. Jianyu Gu, the President of Qualchip, "We had already built the Joint Laboratory with Teledyne LeCroy, equipped with complete test instruments such as high bandwidth oscilloscope、BER、Signal Integrity Analyzer、SATA/SAS/USB/PCIE Protocol Analyzer and so on, which can satisfy the measurement and verification requirements of many high speed interfaces include USB 3.0/USB 2.0. The Joint Laboratory will be open to external, we are glad to provide diversified service for our customers and partners!" 

The USB 3.0 solution of Teledyne LeCroy used the new generation Zi series high performance oscilloscope, especially used the PeRT3(Protocol Enabled Receiver and Transmitter Tolerance Tester) specially developed for the high speed interfaces such as USB3.0/SATA/SAS/PCIE , which made the two key difficulties getting very easy: One is how to change the various patterns for the physical transmitter test, the other one is how  to let the DUT enter Loopback mode required by Receiver Jitter Tolerance Test. Therefore, the USB 3.0 solution of Teledyne LeCroy had been used popularly by USB 3.0 chip companies、system companies, which is the first choice in the industry.

About Qualchip

Qualchip is a corporation who provides high-end analog/digital IP, SoC design and production services. With the consistent goal of "Direct Volume Production Success", Qualchip licenses their own superior IP and provides the whole or partial services from “SPEC definition” to “CHIP delivery”. Qualchip had already developed many IP products with advanced technology successfully such as USB 3.0/2.0 PHY、various high performance ADC/DAC、PLL、DDR PHY. Moreover, the company also possessed complete RTL-to-GDS design flows, include hundred million of gates level and large-scale hierarchical design flow with advanced low power. The technology of IP and SoC design service of Qualchip covers the mainstream technology nodes including 28nm, 40nm, 65/55nm, 90nm, and 130nm.Welcome to log in http://www.qualchiptech.com

About LeCroy

LeCroy Corporation is a worldwide leader in serial data test solutions, creating advanced instruments that drive product innovation by quickly measuring, analyzing, and verifying complex electronic signals. The Company offers high-performance oscilloscopes, serial data analyzers, and global communications protocol test solutions used by design engineers in the computer and semiconductor, data storage device, automotive and industrial, and military and aerospace markets. LeCroy’s 48-year heritage of technical innovation is the foundation for its recognized leadership in “WaveShape Analysis”—capturing, viewing, and measuring the high-speed signals that drive today's

information and communications technologies. LeCroy is headquartered in Chestnut Ridge, New York. Company information is available at http://www.teledynelecroy.com.Know more information thorough LeCroy's Micro blog: http://weibo.com/lecroychina,or call 400-818-1288.




Review Article Be the first to review this article
CST Webinar Series

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
Principal Circuit Design Engineer for Rambus at Sunnyvale, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
Upcoming Events
2016 IEEE International Electron Devices Meeting at Hilton San Francisco Union Square 333 O’Farrell Street San Francisco CA - Dec 3 - 7, 2016
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy