Agilent Technologies Introduces Electrical Redriver Modeling Solution to Solve Key Challenges in Designing Chip-to-Chip Links

SANTA CLARA, Calif. — (BUSINESS WIRE) — November 5, 2012 — Agilent Technologies Inc. (NYSE: A) today introduced a redriver modeling solution designed to quickly and accurately solve the challenge posed by signal distortion in multigigabit-per-second systems.

The redriver modeling solution, available in the Advanced Design System 2012 Transient Convolution Element and SystemVue 2012 AMI Modeling Kit, is used to design electrical redrivers into high-speed chip-to-chip digital links.

Before the multigigabit era, chip-to-chip digital signals could propagate across an entire printed circuit board with little distortion. However, at today’s speeds, rising and falling edges degrade after travelling only a few inches on production board materials such as FR4. In digital applications, it is cost prohibitive to use high-frequency laminate board materials to solve this problem. Inserting a midchannel redriver circuit into the board provides a much more economical solution.

Up to now, simulation tools used to design nonlinear devices have used computationally expensive SPICE techniques such as Newton-Raphson iteration on modified nodal analysis of Kirchoff’s current law. With Agilent’s new redriver modeling solution, fast techniques based on bit-by-bit channel simulation and the IBIS AMI flow are now available for these applications. Unlike SPICE, these techniques include computationally efficient algorithms such as superposition. The techniques were developed by Agilent during a project with Maxim Corp.

Using a novel prestandard extension to the industry-standard IBIS AMI flow, SystemVue 2012 now offers model builders (integrated circuit vendors, for example) a tool to build redriver models. The models run in Agilent’s ADS software, the tool that IC buyers (makers of data center and telecommunications equipment, for example) use to design these chips into their systems.

“We’ve worked closely with Agilent to use SystemVue 2012 to develop prestandard AMI models of our MAX3997 10.3-Gbps Equalizer-Redriver, which our mutual customers can use,” said Mahbubul Bari, models engineer at Maxim Integrated. “The AMI models run much more quickly than SPICE models. This speed lets equipment manufacturers explore the design space. They can plug the model into an end-to-end simulation in ADS 2012 and come up with the optimum combination of transmitter/receiver settings, their channel design and the Maxim redriver settings.”

“It’s been a win-win-win collaboration to work with Maxim as lead customer on this project,” said Colin Warwick, product manager for high-speed digital design at Agilent EEsof EDA. “Maxim gets their redriver designed in quickly, Agilent tools become more valuable to mutual equipment-manufacturing customers, and those customers gain systems that meet performance specifications with low cost and fast time-to-market.”

Maxim and Agilent will submit a proposed enhancement to the IBIS Open Forum later this year with the intent to incorporate the new techniques into a future version of the IBIS standard. Doing so would allow redriver model portability across EDA tools that support this proposed enhancement.

U.S. Pricing and Availability

Agilent’s SystemVue 2012 and Advanced Design System 2012 are available now. Pricing depends on the exact configuration desired. A schematic showing the redriver model in use is available at www.agilent.com/find/ADS_RedriverModeling_images.

Agilent offers a wide selection of high-speed digital solutions, including essential tools to pinpoint problems, optimize devices and deliver results for design and simulation.

About Agilent EEsof EDA Software

Agilent EEsof EDA is the leading supplier of electronic design automation software for microwave, RF, high-frequency, high-speed digital, RF system, electronic system level, circuit, 3-D electromagnetic, physical design and device-modeling applications. More information is available at www.agilent.com/find/eesof.

About Agilent Technologies

Agilent Technologies Inc. (NYSE: A) is the world’s premier measurement company and a technology leader in chemical analysis, life sciences, diagnostics, electronics and communications. The company’s 20,000 employees serve customers in more than 100 countries. Agilent had net revenues of $6.6 billion in fiscal 2011. Information about Agilent is available at www.agilent.com.

NOTE TO EDITORS: Further technology, corporate citizenship and executive news is available at www.agilent.com/go/news.

 

 



Contact:

Agilent Technologies Inc.
Janet Smith, Americas, +1 970-679-5397
Email Contact
Sarah Calnan, Europe, +44 (118) 927 5101
Email Contact
Iris Ng, Asia, +852 31977979
Email Contact

 




Review Article Be the first to review this article

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Computer History Museum: the Future of War is Here
More Editorial  
Jobs
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, Germany
REVISED***Director Product Line RF/IC for EDA Careers at San Jose, CA
Senior SW Developer for EDA Careers at San Jose, CA
Upcoming Events
“Empowering Leadership with WIT and WISDOM” at SEMI 673 South Milpitas Blvd. Milpitas CA - Nov 28, 2017
Artificial Intelligence and Convolution Neural Networks Discussion at San Jose State University Student Union Theater San Jose CA - Dec 4, 2017
Silicon Valley's Only Comprehensive Embedded Systems Conference at San Jose Convention Center 150 W. San Carlos St. San Jose CA - Dec 5 - 7, 2017
Oski Technology’s Decoding Formal Club Meeting at The Conference Center San Jose CA - Dec 7, 2017
DownStream: Solutions for Post Processing PCB Designs
TrueCircuits: IoTPLL



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise