SpringSoft Newsletter - May 2010

Welcome to the SpringSoft Technology Newsletter. This is a monthly e-mail newsletter distributed to our customers, partners, and friends to provide information on our Novas Verification Enhancement and Laker Custom IC Design technologies. We hope the information in this newsletter will help you to use our products more effectively in your design and verification environments.

Please see the links at the end of this newsletter for subscription information or to provide feedback that will help us improve future editions.

Download Printable Version


Verification Tips:

Load Partial Design into Verdi

The Verdi system provides a way to only load partial designs from a compiled library using the command line option -impConf. To use this option, you can create a configuration file which includes one or more scopes to be loaded. For example, the configuration file content could contain the following:

<Continue Reading>

Report Selected Signals in Waveform View

The Verdi system provides a batch mode utility fsdbreport to write out specific signal transitions in a specific time range. However, sometimes it would be more convenient to generate this report from the GUI - since you can view and select signals you would like to report from the intuitive waveform view interactively.

<Continue Reading>


Custom IC Design Tips:

Use Auto Create Wire to Create Wire Segments for Floating Pins

The LakerTM Advanced Design Platform (ADP) unites the full-featured Laker schematic editor, open simulation console and waveform analyzer to provide a complete solution for the rapid design of your analog, mixed-signal, memory, and custom digital IC designs.

<Continue Reading>


News:

DeepChip.com EDA Vendor Survey Results

Part of a recent DeepChip post about Synopsys contained some interesting survey data.  As a rebuttal to the monopolistic Synopsys "Primary EDA Vendor" pitch, the question to users was:

"Could you please name (by company) all the different EDA vendors your company uses to get from design algorithms to GDSII tapeout?"

After Synopsys, Cadence and Mentor, we find Denali, Atrenta and Springsoft rising above everyone else, and with a decent margin. They rose above Magma, Apache, FPGA vendors and a host of small EDA hopefuls.

<Read more>

Place-And-Route System Adds OpenAccess Support - Electronic Design

Custom IC layout is a time-consuming, painstaking task that challenges both designers and their layout tools. SpringSoft's custom IC layout system was initially introduced to address the problem of achieving acceptable quality of results and run times. Employing both rule-driven and schematic-driven layout styles, Laker makes it easier to avoid layout-versus-schematic (LVS) errors even as it reduces the time for custom layout.

<Read more>

Power Corrupted SpringSoft Helps Debug Power Issues - IC Design & Verification Journal

Springsoft has added a power module to its Verdi debug system to help address this. Whereas, under normal circumstances, power is there simply to support real signals, now power can be treated as if it's a signal. You can go through the power structure, checking domains to see what's on and off, confirming whether level shifters and isolation are in place, and use assertions just like you would with signals. It knows about the intended power structure by accepting both CPF and UPF formats.

<Read more>

Auto Cell Placement In Mixed Signal IC's - Electronic Product Design

SpringSoft has been busy this spring with a number of introductions to its suite of software automation products. These include a power-aware debug module for the Verdi automated debug system, and the latest release of the Certitude functional qualification system.

Perhaps of most interest are two new products aimed at addressing the increasing challenge of designing custom chips that contain both analogue and digital circuitry.

<Read more>


Upcoming Events:

47th Design Automation Conference - Anaheim, CA

June 13 - 17
Booth #1357

Visit SpringSoft at DAC and find out how we put you where you want to be!

  • See what products are new at DAC!
  • Want to learn more about SpringSoft Technology? Register for seminars.
  • Play 'Closer to Closure' and 'Peek & Seek' and win great prizes! Including iPads, Kindles, Flips Video Cameras and much more!

Check out SpringSoft's DAC activities here!


SpringSoft Community News!

In the past few months we have added some new features to our website, have you seen them yet?

Video Hints & Tips - Watch quick tips on how to use SpringSoft products more effectively
EDA Blog - Read about and comment on SpringSoft Technology

Find SpringSoft on Twitter and on Facebook.

Twitter: www.twitter.com/SpringSoft
Facebook: www.facebook.com/SpringSoft


We'd appreciate hearing your suggestions, comments or questions about the SpringSoft Newsletter. Please feel free to contact Karim Azar at +1 (408) 467.7860 or Email Contact

Novas, Laker, Verdi, Siloti and nWave are trademarks and Debussy is a registered trademark of SpringSoft, Inc. All other trademarks are property of their respective owners.

Copyright 2010, SpringSoft, Inc. All rights reserved.




Review Article Be the first to review this article
CST Webinar Series

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
Upcoming Events
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy