EDA Solutions Announces Tanner EDA Process Design Kit Support for X-FAB’s 0.18 µm Technologies

Fareham, UK – EDA Solutions announces that X-FAB has released two 0.18 µm process design kits (PDK) for Tanner Tools Pro on X-TIC, X-FAB's online technical database.

Tanner Tools Pro is the software suite for the design, layout and verification of analog, mixed-signal (A/MS), RF and MEMS ICs from Tanner EDA, the world leader in PC-based A/MS and MEMS circuit design software.

The release of this new kit extends X-FAB’s PDK support for Tanner tools, adding X-FAB's 0.18 µm processes to the range of technologies currently supported (0.35, 0.6, 0.8 and 1.0 µm).

The new PDK will ensure a reliable and repeatable development flow and faster development cycles for analog and mixed-signal IC and MEMS designers who use Tanner Tools Pro in combination with X-FAB's 0.18 µm processes.

X-FAB's 0.18 µm modular analog/mixed-signal process family is based on the industrial standard one-poly-three-metal process baseline. It has a wide selection of options such as standard or low power, 1.8 V core voltage with either 3.3 V including RF or 5.0 V I/O voltage, high voltage up to 45 V and NVM options are easily combinable through the modular approach.

Tanner EDA solutions enable designers to move from concept to silicon with ease using highly cost-effective tools: Tanner Tools Pro is a software suite for the design, layout and verification of analog, mixed-signal, RF and MEMS ICs.

It includes S-Edit for schematic capture, T-Spice for analog circuit simulation and L-Edit for physical layout. HiPer Silicon builds on the capabilities of Tanner Tools Pro with advanced features that improve designer productivity, including the HiPer Verify foundry-compatible physical verification engine, Verilog-A simulation, an interactive autorouter, and device layout automation. Tanner EDA software is available on the Windows and Linux platforms.

For more information visit www.eda-solutions.com, www.tannereda.com, and www.xfab.com




Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs

True Circuits:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Qualcomm’s Lu Dai: Energetic leadership for Accellera
More Editorial  
Jobs
Principal Engineer FPGA Design for Intevac at Santa Clara, CA
Technical Support Engineer for EDA Careers at Freemont, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
SOC Logic Design Engineer for Global Foundaries at Santa Clara, CA
Sr. Staff Design SSD ASIC Engineer for Toshiba America Electronic Components. Inc. at San Jose, CA
Upcoming Events
IoT Summit 2017 at Great America ballroom, Santa Clara Convention Center Santa Clara CA - Mar 16 - 17, 2017
SNUG Silicon Valley 2017 at Santa Clara Convention Center Santa Clara CA - Mar 22 - 23, 2017
CDNLive Silicon Valley 2017 at Santa Clara Convention Center Santa Clara CA - Apr 11 - 12, 2017
10th Anniversary of Cyber-Physical Systems Week at Pittsburgh, PA, USA PA - Apr 18 - 21, 2017
Verific: SystemVerilog & VHDL Parsers
TrueCircuits: IoTPLL



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy