Lanny L. Lewyn, Tanner EDA Technical Advisor, Presents on Nanoscale Analog CMOS Design and Shortening Physical Design Time to Market at IEEE NORCHIP Event

November 15 & 16 2009, Trondheim, Norway

Who:

Lanny L. Lewyn, Technical Advisor to Tanner EDA, the world leader in PC-based analog, mixed-signal (A/MS) and MEMS circuit design software, is giving a pre-conference tutorial and invited paper on Physical Design and Reliability Issues in Nanoscale Analog CMOS Technologies at the IEEE Nordic Microelectronics or NORCHIP event.

Dr. Lewyn is president of Lewyn Consulting Inc. (Laguna Beach, CA) and is a Life Senior Member of the IEEE. He holds 29 U.S. patents in CMOS and bipolar circuits, and B.S. Eng. and M.S.E.E. degrees from the California Institute of Technology, and a Ph.D. E.E. from Stanford University.

 

What:

Title

Physical Design and Reliability Issues in Nanoscale Analog CMOS Technologies

Abstract

Physical design deficiencies found after post-layout-extraction result in re-layout and a waste of the industry’s most valuable commodity: time to market. This tutorial presents an overview of these effects on nanoscale analog circuit design and explores how to mitigate them.

 

When

Tutorial

13.00-17.00, Sunday, 15 November 2009

Invited Talk

09.15-10.00, Monday, 16 November 2009

 

Where

Rica Nidelven Hotel

Havnegata 1

NO-7400 Trondheim

Norway

 

More Information:

For more information about Tanner EDA, please visit www.tannereda.com

For more information about Norchip, please visit www.norchip.org.

 

About Tanner EDA Software

HiPer Silicon™ is Tanner EDA’s hallmark software suite for the design, layout and verification of A/MS, RF and MEMS ICs. It includes core functionality for schematic capture, analog circuit simulation and physical layout as well as advanced features that improve designer productivity; including the HiPer Verify™ foundry-compatible physical verification engine, Verilog-A simulation, an interactive autorouter and device layout automation. The entire Tanner EDA product line is available on Windows and Linux platforms.

 

About Tanner EDA

Tanner EDA is a leading provider of PC-based electronic design automation (EDA) software solutions for the design, layout and verification of analog and mixed-signal ICs and MEMS. Its solutions promote innovation by speeding designs from concept to silicon. Tanner EDA software is used by thousands of companies in markets ranging from consumer electronics, biomedical, wireless, imaging, power management, RF and photovoltaics. Founded in 1988, Tanner EDA has shipped over 25,000 licenses of its PC-based electronic design software to more than 4,000 customers in 67 countries. For more information on Tanner EDA products, visit www.tannereda.com.

-end-

Press Contact:

Georgia Marszalek, ValleyPR for Tanner EDA, +1 650 345 7477, Email Contact Twitter: @ValleyPR




Review Article Be the first to review this article
CST: Webinar November 9, 2017

Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Teklatech: Work smart, Not hard
More Editorial  
Jobs
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Upcoming Events
ARM TechCon 2017 at Santa Clara Convention Center Santa Clara CA - Oct 24 - 26, 2017
MIPI DevCon Bangalore 2017 at The Leela Palace Bengaluru India - Oct 27, 2017
The 2017 International Test Conference at Fort Worth Convention Center Fort Worth TX - Oct 31 - 2, 2017
MIPI DevCon Hsinchu City 2017 at Sheraton Hsinchu Hotel Taiwan - Oct 31, 2017
CST: Webinar series



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise