Modern Metal Fatigue Analysis course presented by John Draper, UK, April 1-3, 2009

Professor John Draper is presenting a three-day class on Modern Metal Fatigue Analysis at MIRA, Nuneaton, UK, April 1-3, 2009

There have been major advances in methods of fatigue life estimation over the past 30 years. Allowable stresses can now be estimated to an accuracy of a few percent. Much of this knowledge is available in research papers but is not readily available to designers. This class is intended to help bridge the gap between research and design by providing a concise introduction to modern methods of fatigue analysis and their practical application through worked examples and interaction/discussion. Throughout, the emphasis is on practical application and there is a strong emphasis on what is possible and the pitfalls to avoid.

The class is aimed at Design and Test Engineers responsible for product durability in the ground vehicle, aerospace and manufacturing industries. It will also be of value to academics and undergraduates on mechanical engineering courses. No previous knowledge of fatigue is necessary.

Attendees will be introduced to the concepts of strain-based fatigue analysis and the more traditional S-N curve methods. Modern theories of multiaxial fatigue are described, together with their application to strain gauge measurements and fatigue analysis of finite element models. Also covered is statistical analysis, crack propagation and the fatigue of welded steel joints – as well as the merits and disadvantages of different types of fatigue tests and aspects of practical fatigue analysis. John Draper’s recently published reference book, Modern Metal Fatigue Analysis, forms course-notes for the class and can also be purchased from the EMAS website.

For further information see www.safetechnology.com or contact Email Contact



Review Article Be the first to review this article
Aldec

Featured Video
Jobs
Principle Electronic Design Engr for Cypress Semiconductor at San Jose, California
Senior Electrical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Director, Business Development for Kongsberg Geospatial at Ottawa, Canada
Director, Business Development for Kongsberg Geospatial at remote from home, Any State in the USA
Upcoming Events
IPC Technical Education - PCB Layout - Place and Route at Del Mar Fairgrounds 2260 Jimmy Durante Blvd. Del Mar CA - May 2, 2018
IPC Technical Education at Wisconsin Center 400 W Wisconsin Ave. Milwaukee WI - May 8, 2018
IPC High Reliability Forum at Embassy Suites: Baltimore-At BWI Airport 1300 Concourse Drive Linthicum MD - May 15 - 17, 2018
DAC2018



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise