COADE CAESAR II Software for Pipe Stress Analysis Wins Russian Certification

HOUSTON—(BUSINESS WIRE)—February 26, 2009— COADE announced today that COADE CAESAR II for pipe stress analysis has received its Certificate of Compliance from Russian State Standard system certification, effective December 17, 2008. COADE was assisted in the certification process by its COADE Global Network Partner (CGNP) in Russia, EMT-R.

The Certification states that CAESAR II conforms to Russian standards as described in normative documents RD 10-249-98, standards of calculations for strength of stationary boilers, vapor and hot water pipelines; CA 03-003-07, for the calculation for strength and vibration of steel technological conduits; and State Standard 14249-89 for vessels and other equipment, including norms and methods of strength calculations.

COADE CAESAR II is the world’s most widely used software for pipe stress analysis, used by most major engineering firms and owner-operators of plants and piping facilities. In recent years, COADE has seen rapid growth in Russia and other parts of Eastern Europe for CAESAR II as well as for its other software products, including PVElite for pressure vessel and heat exchanger design and analysis; CADWorx Plant Design Suite for intelligent plant design modeling, process schematics and automatic production of plant design deliverables; and TANK for the design and analysis of oil storage tanks. The company expects continued growth in Russia as its economy expands and invests in its plants and infrastructure. Information on COADE and its products can be found at www.coade.com. Information about EMT-R, is at www.emt.ru or www.cadworx.ru.

About COADE

COADE, Inc. is a provider of software for multiple plant design and engineering disciplines. COADE’s aims are that design and engineering should share relevant information seamlessly, thereby maintaining accuracy and improving efficiency. COADE’s product line conforms to those goals and includes CAESAR II, the world's most widely used pipe stress analysis software; PVElite for pressure vessel and heat exchanger design and analysis; CADWorx Plant Design Suite for intelligent plant design modeling, process schematics and automatic production of plant design deliverables; and TANK for the design and analysis of oil storage tanks. COADE, CAESAR II, CADWorx, PVElite, CodeCalc and TANK are registered trademarks or trademarks of COADE, Inc. For more information, visit www.coade.com.



Contact:

For COADE, Inc.
Gary Carson, 1-713-668-8550
Email Contact
or
COADE, Inc.
Vornel Walker, 1-281-890-4566


Reviews:
Review Article
  • Alex March 12, 2009
    Reviewed by 'Igor Vlasov'
    The sertificate is fake. Caesar II did not implemented RD 10-249-98, GOST 14249 and CA 03-003-07 code!

      5 of 5 found this review helpful.
      Was this review helpful to you?   (Report this review as inappropriate)


For more discussions, follow this link …
Aldec Webinar Nov 30

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Computer History Museum: the Future of War is Here
More Editorial  
Jobs
Senior PIC Test Development Engineer for Infinera Corp at Sunnyvale, CA
ASIC Design Engineer for Infinera Corp at Sunnyvale, CA
Senior SW Developer for EDA Careers at San Jose, CA
Principal PIC Hardware Controls Engineer for Infinera Corp at Sunnyvale, CA
REVISED***Director Product Line RF/IC for EDA Careers at San Jose, CA
Upcoming Events
“Empowering Leadership with WIT and WISDOM” at SEMI 673 South Milpitas Blvd. Milpitas CA - Nov 28, 2017
Artificial Intelligence and Convolution Neural Networks Discussion at San Jose State University Student Union Theater San Jose CA - Dec 4, 2017
Silicon Valley's Only Comprehensive Embedded Systems Conference at San Jose Convention Center 150 W. San Carlos St. San Jose CA - Dec 5 - 7, 2017
Oski Technology’s Decoding Formal Club Meeting at The Conference Center San Jose CA - Dec 7, 2017
TrueCircuits: IoTPLL



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise