Atmel Introduces a Graphical User Interface (GUI) for its Advanced AVR-based 125-kHz RFID Evaluation Kit

HEILBRONN, Germany, Sept. 9 /PRNewswire/ -- Atmel(R) (NASDAQ: ATML) announced today a significant enhancement to the ATA2270-EK1 125-kHz RFID demo kit. This kit, which enables the evaluation and prototyping of Atmel's wide portfolio of LF IDIC(R)s, has been upgraded to include a PC-based GUI application to be connected directly to the kit's hardware. This new user interface provides an optimized platform for the evaluation and customization of Atmel's RFID solutions used in access control, industrial automation, loyalty cards, anti-counterfeiting, and animal identification. Configuration of Atmel tags in all available modes and the selection of the most suitable RFID solution without advanced knowledge of RF engineering have been made even easier.

Atmel's ATA2270-EK1 kit contains everything needed to start using an RFID system including several read/write IDIC transponder samples such as the ATA5558, ATA5567 and ATA5577 ISO card devices for contactless identification. It also includes ATA5567 and ATA5577 coin tags, micromodules, and several other form-factors for evaluation. A reader unit using Atmel's U2270B read/write base station IC, in conjunction with Atmel's ATmega128 AVR(R) Flash microcontroller, an antenna, and a power supply with international adapters provide the means to access the tags. An on-board joystick, LCD, and control buttons allow stand-alone usage of the ATA2270-EK1.

The new PC-based GUI enables detailed evaluations by providing direct access to all the functions of each device. Configuration modes can be easily selected and programmed, and users are warned when modes configured in the transponder IDICs are not compatible with the ASK-based reader IC. Using the software the user can select Animal-ID functionality and the kit can be tuned to the 134.2 kHz required for animal tagging analysis. A special routine included in the AVR firmware enables data to be read and written to the IDICs in accordance with ISO standards 11784 and 11785. Unique format (used for access control), and waste management can also be configured from the GUI. A special "Bit String" form allows users to create and test commands by sending out a bit string to the IDIC. All of these incredibly powerful tools enable the user to control every aspect of the RFID system including the ability to render tags inoperable.

Thanks to the inclusion of royalty-free source code and Gerber schematics, the ATA2270-EK1 provides a unique prototyping environment for low-cost turnkey solutions, allowing users to develop, implement, and test system-level designs. The ATA2270-EK1 is supported by all the standard AVR development tools such as AVR Studio(R), STK(R)500, JTAGICE mkII, etc.

Availability and Pricing

The RF IDIC evaluation kit ATA2270-EK1 with the new PC-based GUI is available now. Pricing starts at US $399 per unit.

    Footnote
    GUI = Graphical User Interface
    ID = Identification
    IDIC(R) = Identification IC (registered trademark of Atmel)
    LCD = Liquid Crystal Display
    LF = Low Frequency
    PC = Personal Computer
    RFID = Radio Frequency Identification

About Atmel

Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions focused on consumer, industrial, security, communications, computing and automotive markets.

(C) 2008 Atmel Corporation. All rights reserved. Atmel(R), Atmel logo and combinations thereof, AVR(R), AVR Studio(R), IDIC(R), STK(R) and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

Information

Product Information on Atmel's ATA2270-EK1 demo kit may be retrieved at: http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3956

If you are interested in Atmel's complete RFID product scope, please visit: http://www.atmel.com/products/RFID/

     Press Contacts
     Dr. Susanne van Clewe, Marcom Manager Communications and Automotive
      Products
     Tel: +49 7131 67-2081, Email:  susanne.van-clewe@atmel.com
     Helen Perlegos, Public Relations
     Tel: +1 408 487-2963, Email: hperlegos@atmel.com

Web site: http://www.atmel.com/




Review Article Be the first to review this article
Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Fall Schedule: A Host of Must-attends
More Editorial  
Jobs
DDR 3-4-5 Developer with VIP for EDA Careers at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Senior Methodology Automation Engineer for EDA Careers at San Jose, CA
Proposal Support Coordinator for Keystone Aerial Surveys at Philadelphia, PA
Upcoming Events
11th International Conference on Verification and Evaluation of Computer and Communication Systems at 1455 DeMaisonneuve W. EV05.139 Montreal Quebec Canada - Aug 24 - 25, 2017
The Rise of Mechatronics at Dassault Systèmes San Diego 5005 Wateridge Vista Drive San Diego CA - Sep 12, 2017
The Rise of Mechatronics at Buca di Beppo - Pasadena 80 West Green Street Pasadena CA - Sep 13, 2017
S2C: FPGA Base prototyping- Download white paper



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy