New Case Study Published on Holland Applied Technologies Choosing CADWorx for Intelligent 3D Plant Design, Cutting Design Time 66% and Saving 10% on Fabrication Costs

HOUSTON—(BUSINESS WIRE)—July 21, 2008— COADE announced today the publication of a new Case History from Holland Applied Technologies, describing how the firm evaluated, selected and implemented CADWorx Plant Professional, COADEs AutoCAD-based for intelligent 3D plant design, achieving significant improvements in plant production processes that improved accuracy and saved time and money. The case history was developed in conjunction with Dan Gratie, project engineer with Holland Applied Technologies, who was among the first at the firm to use the CADWorx program.

We looked at several different 3D plant design solutions and selected CADWorx Plant Professional because it was so much easier to use and less expensive than the other alternatives that we reviewed, said Gratie. The case describes how CADWorx intelligence enabled them to later produce isometric drawings and bills of material that perfectly match the original plant model, and do so with a minimum of additional effort. Instead of revisiting the design once for the layout, a second time for the isometric drawings and a third time for the bill of materials, the designer just created a single model. Streamlining the design process made it possible for our designers to do in one month what used to take two to three months, Gratie added, and the resulting reduction in rework and scrap material has reduced our fabrication costs by 10% since we began using CADWorx. The case also explains how Holland Applied Technologies uses CADWorx to visualize the design and avoid clashes, which helps head off manufacturing problems, and how bills of material are drawn directly from the 3D model, so they are now much more accurate. This and other Case History articles can be found at www.coade.com.

About Holland Applied Technologies

Holland Applied Technologies, headquartered in Burr Ridge, Illinois, designs and builds turnkey skid-based processing systems as well as process subcomponents primarily for the biopharmaceutical manufacturing industry. Information on the company is at http://www.hollandapt.com.

About COADE

COADE, Inc. is a provider of software for multiple plant design and engineering disciplines. COADEs aims are that design and engineering should share relevant information seamlessly, thereby maintaining accuracy and improving efficiency. COADEs product line conforms to those goals and includes: CAESAR II, the world's most widely used pipe stress analysis software; PV Elite for pressure vessel and heat exchanger design and analysis; CADWorx Plant Design Suite for intelligent plant design modeling, process schematics and automatic production of plant design deliverables; and TANK for the design and analysis of oil storage tanks. COADE, CAESAR II, CADWorx, PVElite, CodeCalc and TANK are registered trademarks or trademarks of COADE, Inc. For more information, visit www.coade.com.



Contact:

For COADE, Inc.
Gary Carson, 1-713-668-8550
Email Contact
or
Vornel Walker, 1-281-890-4566
Email Contact
http://www.coade.com




Review Article Be the first to review this article

Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Fall Schedule: A Host of Must-attends
More Editorial  
Jobs
Senior Methodology Automation Engineer for EDA Careers at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
DDR 3-4-5 Developer with VIP for EDA Careers at San Jose, CA
Proposal Support Coordinator for Keystone Aerial Surveys at Philadelphia, PA
Upcoming Events
11th International Conference on Verification and Evaluation of Computer and Communication Systems at 1455 DeMaisonneuve W. EV05.139 Montreal Quebec Canada - Aug 24 - 25, 2017
The Rise of Mechatronics at Dassault Systèmes San Diego 5005 Wateridge Vista Drive San Diego CA - Sep 12, 2017
The Rise of Mechatronics at Buca di Beppo - Pasadena 80 West Green Street Pasadena CA - Sep 13, 2017
DownStream: Solutions for Post Processing PCB Designs
S2C: FPGA Base prototyping- Download white paper
TrueCircuits: UltraPLL



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy